Brass L96

Designation

Name	The value
Designation GOST Cyrillic	Л96
Designation GOST Latin	L96
Transliteration	L96
By chemical elements	Л96

Description

Brass l96 is used: for the production of sheets, strips, pipes, wire; parts for various industrial uses method of cold forming, especially by drawing; the parts are manufactured by forging and embossing; round drawn thin-walled tubes; drawn capillary tubes used in propose hypersound or ultras and instrumentation and refrigeration equipment; drawn rectangular tubes, intended for the manufacture of waveguides; oval drawn seamless tubes used in automotive and other industries; cold-drawn tubes for the manufacture of honeycomb radiators; wire for parts for electrical engineering; medals and badges.

Note

Simple (double) brass.
Brass stamps Л98 not prone to stress corrosion cracking; suitable for enameling.

Standards

Name	Code	Standards
Tape	В54	GOST 15527-2004
Non-ferrous metals, including rare, and their alloys	В51	GOST 28873-90, OST 4.021.009-92
Tubes of non-ferrous metals and alloys	В64	GOST 529-78, GOST 2624-77, GOST 2936-75, GOST 11383-75, GOST 20900-75, GOST 617-2006, OST 4Г 0.021.400-80, OST 4.021.125-92, OST 4.021.130-92, TU 48-0808-19-87, TU 48-21-37-79, TU 48-21-477-84, TU 48-21-611-78, TU 48-21-689-80

Chemical composition

Standard	P	Fe	Cu	Zn	Sb	Pb	Bi
GOST 617-2006	≤0.01	≤0.1	95-97	Rest	≤0.005	≤0.03	≤0.002

Cu is the basis.
According to GOST 15527-2004, GOST 617-2006 the sum of other elements should be ≤ 0,20%. In brass, the mass fraction of nickel is allowed up to 0.30% due to the mass fraction of copper, which is not taken into account in the sum of other impurities. For antimagnetic brass, the mass fraction of iron should not exceed 0.030%.

Mechanical properties

Section, mm	σ_U, MPa	d₅, %	d₁₀	HV, MPa
Round tube radiator as supplied by GOST 529-78 (samples, in the cross section of specified diameter)
10	470.4-568.4	-	-	-
10	392-588	-	-	-
Tube, drawn, seamless flat-sided oval in the state of delivery according to GOST 2936-75
	340-590	-	-	-
The pulled capillary tube in the state of delivery according to GOST 2624-77 (samples)
-	≥200	≥40	≥35	-
-	≥250	≥5	≥4	-
Pipe humanitariannet and extruded in the state of delivery according to GOST 617-2006 (in cross-section is specified outside diameter, in brackets are the values for pipes with improved plasticity and strength)
≤360	≥200 (210)	≥38	≥35 (40)	≤55
≤360	≥240 (270)	≥10	≥8 (8)	-
≤200	≥190	≥32	≥30	≤80
200	≥180	≥32	≥30	-
≤360	≥280 (310)	-	-	90-135

Description mechanical marks

Name	Description
σ_U	Limit short-term strength
d₅	Elongation after rupture
d₁₀	Elongation after rupture
HV	The Vickers hardness

Physical characteristics

Temperature	r, kg/m³
20	8900

A description of the physical symbols

Name	Description
Е	The normal elasticity modulus
l	Coefficient of thermal conductivity
R	UD. the resistivity