Alloy MNZHKT5-1-0,2-0,2

  • Alloy MNTS16-29-1.8
  • Alloy MNMts43-0.5 (Kopel)
  • Alloy MNMts5-3.7
  • Alloy MNMz60-20-20
  • Alloy MNMts68-4-2
  • Alloy MNMtsAZh3-12-0.25-0.2
  • Alloy MNMtsAZh3-12-0,3-0,3 (Manganin)
  • Alloy MNMtsAZhVTNb40-2-1,5-1,4 (MN40S)
  • Alloy MNMZh40-1,4-0,45
  • Alloy MNTs12-24
  • Alloy MNTs15-20 (Neusilber)
  • Alloy MNTs18-20
  • Alloy MNC18-27
  • Alloy MNMts4.5-1.5 (Alloy A)
  • Alloy Neusilber 30
  • Alloy NK
  • Alloy NK2.4 (Cilin)
  • Alloy HM25
  • Alloy NM40A
  • Alloy NM60A
  • Alloy NMZhMz28-2,5-1,5
  • Alloy NMMKZhMC30-4-2-1 (VKM)
  • Alloy NMMZTA26-1,5-1,1-0,5
  • Alloy NMCAT3-1,5-0,6
  • Alloy NMCATC1-1,5-2,5-0,15
  • Alloy NHC9-0.9 (Silch)
  • Alloy Alloy 273
  • Alloy MNA13-3 (Kunial A)
  • Castolin Alloy
  • Alloy MN0.6 (Alloy TP)
  • Alloy MN10
  • Alloy MN15
  • Alloy MH16 (Alloy TB)
  • Alloy MH17 (Alloy B)
  • Alloy MN19 (Melchior)
  • Alloy MN2.15
  • Alloy MN23
  • Alloy MN25
  • Alloy MN45 (Constantan)
  • Alloy MN6
  • Alloy MN95-5
  • Alloy MNMts40-1.5 (Constantan)
  • Alloy MNA6-1.5 (Kunial B)
  • Alloy MNAZHMZ6-0.8-0.8-0.6 (BS-3)
  • Alloy MNAKH11-2,5-1,0-0,8 (Alloy 131)
  • Alloy MNAHMC15-3,5-2-3 (Alloy 538)
  • Alloy MNAHMc20-4-3-4 (Alloy 546; Camelon)
  • Alloy MNAXMZ4,5-4,5-0,7-2,5 (Kamelin)
  • Alloy MNZh5-1
  • Alloy MNZh9.3-0.5 (Menigel)
  • Alloy MNZHKT5-1-0,2-0,2
  • Alloy MNZHMZ10-1-1
  • Alloy MNZHMZ30-1-1
  • Alloy MNMts3-12 (Manganin)

    • Designation

    Name The value
    Designation GOST Cyrillic МНЖКТ5-1-0,2-0,2
    Designation GOST Latin MHZhKT5-1-0,2-0,2
    Transliteration MNGKT5-1-02-02
    By chemical elements CuNiFeCoTe5-1-0,2-0,2

    Description

    Alloy MNZHKT5−1-0,2−0,2 used: for the production of round welded wire and welded round drawn and extruded rods diameter from 0.8 mm to 5.0 mm, designed for manual, semi-automatic welding in protective gases of copper-Nickel alloy and copper with bronze, brass and steel (carbon, alloy and corrosion resistant), as well as surfacing on steel.

    Standards

    Name Code Standards
    Welding and cutting metals. Soldering, riveting В05 GOST 16130-90
    Non-ferrous metals, including rare, and their alloys В51 GOST 28873-90, GOST 492-2006

    Chemical composition

    Standard C Mn Si Fe Cu Ti Zn Pb Ni+Co
    GOST 492-2006 ≤0.03 0.3-0.8 0.15-0.3 1-1.4 Rest 0.1-0.3 ≤0.5 ≤0.005 5-6.5
    Cu is the basis.
    According to GOST 492-2006, the total mass fraction of impurities is ≤ 0.70%.

    Technological properties

    Name The value
    Corrosion resistance The alloy is resistant.