Alloy МН10

  • Alloy MNTS16-29-1.8
  • Alloy MNMts43-0.5 (Kopel)
  • Alloy MNMts5-3.7
  • Alloy MNMz60-20-20
  • Alloy MNMts68-4-2
  • Alloy MNMtsAZh3-12-0.25-0.2
  • Alloy MNMtsAZh3-12-0,3-0,3 (Manganin)
  • Alloy MNMtsAZhVTNb40-2-1,5-1,4 (MN40S)
  • Alloy MNMZh40-1,4-0,45
  • Alloy MNTs12-24
  • Alloy MNTs15-20 (Neusilber)
  • Alloy MNTs18-20
  • Alloy MNC18-27
  • Alloy MNMts4.5-1.5 (Alloy A)
  • Alloy Neusilber 30
  • Alloy NK
  • Alloy NK2.4 (Cilin)
  • Alloy HM25
  • Alloy NM40A
  • Alloy NM60A
  • Alloy NMZhMz28-2,5-1,5
  • Alloy NMMKZhMC30-4-2-1 (VKM)
  • Alloy NMMZTA26-1,5-1,1-0,5
  • Alloy NMCAT3-1,5-0,6
  • Alloy NMCATC1-1,5-2,5-0,15
  • Alloy NHC9-0.9 (Silch)
  • Alloy Alloy 273
  • Alloy MNA13-3 (Kunial A)
  • Castolin Alloy
  • Alloy MN0.6 (Alloy TP)
  • Alloy MN10
  • Alloy MN15
  • Alloy MH16 (Alloy TB)
  • Alloy MH17 (Alloy B)
  • Alloy MN19 (Melchior)
  • Alloy MN2.15
  • Alloy MN23
  • Alloy MN25
  • Alloy MN45 (Constantan)
  • Alloy MN6
  • Alloy MN95-5
  • Alloy MNMts40-1.5 (Constantan)
  • Alloy MNA6-1.5 (Kunial B)
  • Alloy MNAZHMZ6-0.8-0.8-0.6 (BS-3)
  • Alloy MNAKH11-2,5-1,0-0,8 (Alloy 131)
  • Alloy MNAHMC15-3,5-2-3 (Alloy 538)
  • Alloy MNAHMc20-4-3-4 (Alloy 546; Camelon)
  • Alloy MNAXMZ4,5-4,5-0,7-2,5 (Kamelin)
  • Alloy MNZh5-1
  • Alloy MNZh9.3-0.5 (Menigel)
  • Alloy MNZHKT5-1-0,2-0,2
  • Alloy MNZHMZ10-1-1
  • Alloy MNZHMZ30-1-1
  • Alloy MNMts3-12 (Manganin)

    • Designation

    Name The value
    Designation GOST Cyrillic МН10
    Designation GOST Latin MH10
    Transliteration MN10
    By chemical elements CuNi10

    Description

    Alloy МН10 used: for the manufacture of condenser tubes; heat exchangers; welded structures shipbuilding.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 28873-90
    Tubes of non-ferrous metals and alloys В64 TU 48-21-851-88

    Mechanical properties

    sT|s0,2, MPa σU, MPa d5, % y, %
    Castings according to GOST 2685-75
    98-196 245-294 44-50 40
    294-392 490 2-8 -

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    y The relative narrowing