Св-06Х19Н9Т stainless steel welding wire

International Equivalent

Mark	Analogue	W. Nr.	Aisi Uns	En	Order
06Х19Н9Т	H-60		308LSi		Delivery from the stock, in stock

Relevance

Sv-06Cr19N9T corrosion-resistant welding wire is produced according to GOST 2246−70, RD 03−613−03 and technical conditions 1220−005−84 823 540−2010. The wire is used for semi-automatic welding of stainless steels type 19−9 in shielding gas mixture, for manual arc welding of most critical structures made of austenitic steel grades: X16N13B, X20N12T-L, 12X18N12T, 12X18N9T and similar types, which operate under high pressure and 570−650°Ñ temperatures.

This welding wire is usually used for welding if the weld metal is not subject to severe requirements with respect to resistance to intergranular corrosion.

Technical specifications 1211−134−27 286 438−2006; GOST 2246	Св-06Х19Н9Т
Tolerances in mm	Wire diameter, in mm
-0,07	0,8
-0,09	1,0; 1,2
-0,12	1,6

Mechanical properties of the weld metal

Steel type	Chemical properties of the wire, in %	Tensile strength, in MPa
Св-06Х19Н9Т	Si=0,40−1,0, С≤0,08, Mn=1,0−2,0, Тi=0,50−1,0, Ni=8,0−10,0, Cr=18,0−20,0	Yield strength, not less, MPa,
Св-06Х19Н9Т	Si=0,40−1,0, С≤0,08, Mn=1,0−2,0, Тi=0,50−1,0, Ni=8,0−10,0, Cr=18,0−20,0	Relative elongation, % not less
Св-06Х19Н9Т	Si=0,40−1,0, С≤0,08, Mn=1,0−2,0, Тi=0,50−1,0, Ni=8,0−10,0, Cr=18,0−20,0	When tested for impact bending work impact Kv during welding in shielding gas (CO2 — Ar + 5%).
Св-06Х19Н9Т	Si=0.40−1.0, C≤0.08, Mn=1.0−2.0, Ti=0.50−1.0, Ni=8.0−10.0, Cr=18.0−20.0	In the impact bend test, the impact work Kv during welding in shielding gas (CO2- Ar+ 5%).

Delivery type:

5 kg coil mass D — 200

Cassette with the mass of 15−18 kg K — 300

Advantages of application:

— brilliant wire surface, equilibrium, provide stability in the contact of the current lead (wire-tip).

— High quality of weld, constant diameter along the length of wire, dense layer-by-layer winding ensures stability of arc burning.

Mechanical characteristics of Sv-06H19N9T wire:

The tensile strength of high-alloyed and alloyed wire meets fully the standards.

Wire diameter, in mm	for production of electrodes	for cladding (welding)
Sv. 2.0	637−931 (65−95)	686−1029 (70−105)
0,8−1,5	-	882−1323 (90−135)
2,0	686−980 (70−100)	784−1176 (80−120)
1,6	686−980 (70−100)	882−1274 (90−130)

The tolerances and wire diameters are as specified below:

wire diameter nominal	for production of electrodes	for cladding (welding)
0,8		-0,07
1,6; 2,0	-0,06	-0,12
2,5; 3,0	-0,09	-0,12
1,0
1,2	-	-0,09
1,4
1,5	-	-0,09
4,0; 5,0; 6,0	-0,12	-0,16

Ferritic Phase:

The composition in the wire of the ferritic phase is regulated solely by agreement of the parties.

The chemical properties of the weld metal:

Cu	P	S	V	N	Al	W
0,03	0,023	0,006	0,04	0,02	0,03	0,05
Mn	Si	С	Cr	Ti	Mo	Ni
1,12	0,59	0,06	18,14	0,71	0,08	8,25

Welding position:

N1, 2, P1, 2, N45, V1, D.

Welding technological properties:

Quality formation of the root, facing and filling layers of the weld, stable arc combustion. Welded metal wire is used in argon (inert gas) environment.

Mechanical characteristics of the deposited metal (testing during submerged-arc welding):

Welding wire grade	Elongation, % Relative elongation, in %	Yield strength, in σ T, MPa	Tensile strength σ B, in MPa	Impact toughness, in KCU J/cm2
Св-06Х19Н9Т	36	319,2	592,3	85,6

Delivery

Wire diameter: 0.8, 1, 1.2, 1.6, 2 and 3mm (manufacture of any other diameter on order is possible). Packaging: 80−100 kg coils, metal frame coils K300, K415, plastic coils D200, D300. Technical documentation includes data on chemical composition, marginal percentage of impurities; mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale productions. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.

Buy at the best price

Evek GmbH has a diverse assortment of welding wire on stock. We supply certified products of domestic and foreign manufacturers. Our staff is always happy to provide you with expert assistance in choosing metal products. We employ some of the most experienced consulting managers. Strict adherence to production standards, excellent product quality and minimal lead time are the face of our company. Discount discounts have been introduced for regular customers.