SV-08Х20н9Г6 - 1.4006 - er307 stainless steel welding wire
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 12X13 | EJ1 | 1.4006 | 410 | X12CrN13 | Delivery from the stock, in stock |
| 10X13 | 1.4006 | 410 | X10Cr13 | Delivery from the stock, in stock |
General Characteristics
ER 307 (Sv-08Cr20H9H7T) solid wire and rod for semi-automatic and argon-arc welding provides high quality welds with high oxidation and intergranular corrosion resistance. Widely used in mechanical engineering, food, petrochemical industry and power engineering. It is designed for welding of stainless steels and hard-to-weld steels, welding of austenitic-manganese steels of high strength corrosion-resistant steels, buffer layers with subsequent surfacing of wear-resistant hard layer.
Analogues
DIN 8556 SG X 15 CrNiMn 18 8
EN 12 072 G/W 18 8 Mn
AWS A-5.9: ER 307Si
Alloy-No: 1.4370
Substitute and analogue of domestic brand of welding wire Св-08Х20Н9Г7Т, as well as its varieties.
Chemical composition of ER 307, in %:
| Mn | Si | C | Ni | Cr |
|---|---|---|---|---|
| 7 | 0,8 | <0,10 | 8,5 | 18,5 |
Mechanical characteristics of ER 307:
| Tensile strength | N/mm2 | 650 | Rm |
|---|---|---|---|
| yield strength | N/mm2 | 400 | Rp |
| Impact toughness | (20°C) | 70 | Av |
| Elongation | % | 35 | A5 |
Packaging, dimensions
| Packaging | Diameter, mm | Item number |
|---|---|---|
| 15kg spool BS300 | 0,8 | 21 501 214 |
| 15kg spool BS300 | 1,0 | 581 904 |
| 250kg Accutrak drum | 1,0 | 581 959 |
| 15kg spool BS300 | 1,2 | 581 911 |
| 15kg spool BS300 | 1,6 | 581 942 |
Mechanical properties of ER 307 wire:
Wire tolerances and diameters are as specified below:
| Nominal wire diameter | Tolerance limit for wire designed for |
|---|---|
| 4; 5; 6 | -0,12, -0,16 |
| 2,5; 3,0 | -0,09, -0,12 |
| 1,2 | -0,09 |
| 1,5 | -0,09 |
| 1,4 | |
| 1 |
Tensile breaking strength of alloyed and high-alloyed wire meets the standards.
| Wire diameter, mm | Tensile breaking strength of wire, in MPa (kgf/mm2), designed |
|---|---|
| 2,0 | 686−980 (70−100), 784−1176 (80−120) |
| Sv. 2,0 | 637−931 (65−95), 686−1029 (70−105) |
| 0,8−1,5 | 882−1323 (90−135) |
| 1,6 | 686−980 (70−100), 882−1274 (90−130) |
There are 3 types of welding wire. 1) Activated wire (it contains metal and up to 5% of powder additives); 2) solid wire — for welding with semi-automatic and automatic machines; 3) flux-cored wire — for non-fused electrodes. Materials for welding are divided by the method of insulation, modification and a number of other qualities, such as physical characteristics. According to plasticity, the wire is divided into the 1st and 2nd class. Depending on the method of processing — on light and oxidized. The latter is less common. If the wire is damaged, it is not recommended — it may reduce the quality of the weld.
Application of
Cladding hard-welded steel is an inseparable part of any metallurgical production, which is used to connect a variety of metal structures. This wire is used for semi-automatic and argon-arc welding of austenitic-manganese steels with high tensile strength, high-carbon and dissimilar steels working at up to 300 °C. It is used for welding semi-automatic single-block welders with a separate wire feeder and 2-block. It is used for welding tanks, pipelines in the chemical, petroleum, food, machinery, when the use of carbon electrodes, which leads to a significant reduction in weld quality.
Buy at the best price
Evek GmbH offers the widest selection of welding wire in retail and wholesale. The popularity of ER 307 brand (Sv-08Х20Н9Г7Т) is due to its significant efficiency and low price. All products manufactured by our company are certified. Technological configuration of every stage of production makes it possible to fulfill individual orders if you are not satisfied with the basic version of the product. The price depends on the volume and additional terms of delivery. The terms of fulfilling orders are minimal. Preferential discounts are available for bulk purchases.