Tu 11-77 (Yae0.021.057 TU). Molybdenum bars.

1. technical requirements

1.1 Molybdenum bars shall comply with the requirements of these specifications.

1.2 Chemical composition

Grade of molybdenum Content of molybdenum, %, The content of impurities %, Al + Fe Ni Si Ca + Mg
MG 99,955 0,018 0,005 0,014 0,008
MK 99,932 0,018 0,005 0,019 - 0,037 0,008
MRN 99,933 0,025 0,020 0,014 0,008

1.3.Diameter, minimum rod length and state of delivery must meet the following requirements.

Diameter, mm Diameter tolerance, %.
Length, mm, not less
1,0 - 1,9 in 0,1 ± 2,5 1000 drawn
2,0 - 2,9 in 0,1
3.0 - 4.8 in 0.1 forged
5.0 - 10.5 in 0.5 ± 3,0 500
11.0 - 18.0 in 1.0 300

1.4 The color of drawn rods should be from black to dark gray. The colors of off-white are allowed. Oxidation on the surface of forged bars is allowed.
1.5 The bars shall be without cavities, cracks, delaminations, large burrs and dashes. Small dashes, burrs, traces of forging or straightening within the diameter tolerance, as well as single large burrs on MRN grade bars are allowed.
1.6 The ends of rods shall be evenly trimmed. Minor chips are allowed.
1.7 The bars shall be delivered straight. The bend should not exceed 1% of the measured rod length.

Supplier

We offer to buy molybdenum rounds, bars from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with modern quality standards. Supplier Evek GmbH offers to buy molybdenum round, bar, the price - optimal in this segment of metal products.

Buy, bargain price

Supplier Evek GmbH offers molybdenum circle, bar, price - determined by the technological features of production without the inclusion of additional costs. The company's website displays information on the latest arrivals of products. Today you can buy molybdenum rounds and bars at the best price. We have the best price-quality ratio. In the segment of rare and refractory metals, Evek GmbH is a profitable supplier.