Alloy ХН30ТДЮ (ЭП655; ВНС12)
Designation
Description
Alloy ХН30ТДЮ used: for the production of bars with diameter 8 ÷ 32, 35, 40, 45 and 55 mm, designed for manufacture of parts of special equipment.
Name | The value |
---|---|
Name | The value |
Designation GOST Cyrillic | ХН30ТДЮ |
Designation GOST Latin | XH30TDJu |
Transliteration | HN30TDYu |
By chemical elements | CrNi30TeДAl |
Name | The value |
---|---|
Name | The value |
Designation GOST Cyrillic | ЭП655 |
Designation GOST Latin | EP655 |
Transliteration | EhP655 |
By chemical elements | - |
Name | The value |
---|---|
Name | The value |
Designation GOST Cyrillic | ВНС12 |
Designation GOST Latin | BHC12 |
Transliteration | VNS12 |
By chemical elements | ВNiPb12 |
Alloy ХН30ТДЮ used: for the production of bars with diameter 8 ÷ 32, 35, 40, 45 and 55 mm, designed for manufacture of parts of special equipment.
Name | The value |
---|---|
Name | The value |
Macrostructure and pollution | The macrostructure of the alloy bars on THAT 14-1-844-74 should not matusadona sinks, looseness, bubbles, cracks, inclusions, delaminations, placenow visible without using the magnifying devices. |
Particularities of production of goods | Bars on the other 14-1-844-74 diameter up to 22 mm inclusive are supplied in heat treated condition for the regime: Quenching in water from 1150-1180 °C. the hardness of bars should not exceed 331 HB. Bars with a diameter of over 22 mm are supplied without heat treatment. All sizes of bars are controlled Rockwell hardness for heat treated samples regime: Quenching in water from 1150-1180 °C + Aging at 740-760 °C (exposure 8-12 hours), air cooling. Hardness of heat-treated samples should be HRC≥54. |