Alloy AMK

  • Alloy AMK
  • Alloy AMST
  • Alloy AH-2.5
  • Alloy AO12-1
  • Alloy AO20-1
  • Alloy AO3-7
  • Alloy AO6-1
  • Alloy AO9-1
  • Alloy AO9-2
  • Alloy ACM

    • Designation

    Name The value
    Designation GOST Cyrillic АМК
    Designation GOST Latin AMK
    Transliteration AMK
    By chemical elements -

    Description

    Alloy AMK applies: for bimetallic strip steel by rolling and subsequent punching of liners with a thickness of friction layer is less than 1 mm.

    Note

    The recommended modes of operation:
    — load ≤ 50,0 Mn/m2 (500 kgf/cm2);
    — sliding speed ≤ 20 m/s;
    temperature ≤ 120 °C;
    — recommended shaft hardness ≥ 250 HB.
    On an antifriction layer of articles coated with a soft metal or a polymer antifriction coating thickness of from 0.003 to 0.03 mm. permitted by agreement with the consumer in technically justified cases to cover the product with a soft metal or polymer coating.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 14113-78

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Sb Mg Te
    GOST 14113-78 ≤0.1 9-11 ≤0.4 0.8-1.2 Rest ≤0.1 ≤0.5 ≤0.3 ≤0.1
    Al is the base.
    According to GOST 14113-78, the content of other impurities, individually, should be ≤ 0.10%, and the total content of other impurities should be ≤ 0.30%.