Bronze БрК3Мц1 (Brkmc3-1)

  • Bronze БрХ0,6Цр0,05 (БрХЦр0,6-0,05)
  • Bronze BrN10,5A0,5 (BrNA10,5-0,5)
  • Bronze БрН2,5Х0,7К0,6 (БрНХК2,5-0,7-0,6)
  • Bronze БрН5Мц2Т0,1 (БрНМцТ5-2-0,1)
  • BrNTsr bronze
  • Bronze BrSr0,1
  • Bronze БрТ5Х0,5 (БрТХ5-0,5)
  • Bronze БрХ0,2Нб0,1 (Alloy 204А; БрХНб0,2-0,1)
  • Bronze БрХ0,3Цр0,09 (БрХЦр0,3-0,09)
  • Bronze БрХ0,4Ко0,4Кр0,2Мг0,04 (Alloy №50)
  • Bronze БрХ0,4Нб0,25 (Alloy 204; БрХНб0,4-0,25)
  • Bronze БрХ0,5В0,2Цр0,2 (ХВЦр0,5-0,2-0,2)
  • Bronze БрХ0,6Т0,5 (БрХТ0,6-0,5)
  • Bronze BrMc5
  • BrCr0.7 bronze
  • Bronze БрХ0,8
  • Bronze BrX1
  • Bronze BrC1Cr
  • Bronze BrChNb
  • Bronze BrCNT
  • Bronze BrCrK
  • Bronze BrCrTV
  • Bronze BrCr0,2
  • Bronze BrCr0,3
  • Bronze BrCr0,4
  • Bronze BrCr0.7
  • Bronze БрА9Ж4Н4Мц1 (БрАЖНМц9-4-4-1)
  • Bronze BrB2
  • Bronze БрАЖ1,5 (БрАЖ10-1,5)
  • Bronze БрААЖ3Мц1,5 (БрАЖМц10-3-1,5)
  • Bronze БрААЖ10Ж4Н4 (БрАЖН10-4-4)
  • Bronze БрАА10Мц2 (БрАМц10-2)
  • Bronze BrA5
  • Bronze БрА6Мг1 (БрАМг6-1)
  • Bronze BrA7
  • Bronze БрА8,5Ж4Н5Мц1,5 (БрАЖНМц8,5-4-5-1,5)
  • Bronze БрАА9Ж4 (БрАЖ9-4)
  • Bronze БрА9Мц2 (БрАМц9-2)
  • Bronze БрБ1,7НТ (БрБНТ1,7)
  • Bronze БрБ1,9НТ (БрБНТ1,9)
  • Bronze БрБ1,9НТМг (БрБНТ1,9Мг)
  • Bronze BrN1,5Kr0,5 (BrNKr1,5-0,5)
  • Bronze BrB2,5
  • Bronze БрК0,4Х0,6Кo1,6 (БрКХКo0,4-0,6-1,6)
  • Bronze BrK1H3 (BrKN1-3)
  • Bronze БрК3Мц1 (БрКМц3-1)
  • Bronze BrKd0,5X0,15 (BrKdX0,5-0,15)
  • Bronze BrKd1
  • BrKo3Mts10 (BrKoMts3-10) bronze
  • Bronze BrMg0.03Cr0.035 (BrMgCr0.03-0.035)
  • Bronze BrMg0,3
  • Bronze BrMg0,5
  • Bronze BrMg0,8
  • Bronze BrMc12A8Zh3N2 (BrMcAzHN12-8-3-2)

    • Designation

    Name The value
    Designation GOST Cyrillic БрК3Мц1
    Designation GOST Latin BpK3Mts1
    Transliteration BrK3Mts1
    By chemical elements BaCo3Mn1
    Name The value
    Designation GOST Cyrillic БрКМц3-1
    Designation GOST Latin BpKMts3-1
    Transliteration BrKMts3-1
    By chemical elements BaCoMn3-1

    Description

    Bronze БрК3Мц1 used: for the manufacture of semi-finished products (strips, bands, bars and wire); parts of all kinds for chemical apparatus; springs and spring parts; parts for shipbuilding; welded structures; round welding wire and welding rods round drawn and extruded with a diameter of from 1.2 to 8.0 mm, designed for manual welding in shielding gases, non-rigid structures made of copper and automatic copper welding under flux.

    Note

    Corrosion resistant silicon-manganese heat resisting bronze, is suitable for welding and has high resistance to compression.
    Analogue of bronze Brkmc3−1 (БрК3Мц1) at CMEA 377−76 is bronze CuSi3Mn1.

    Standards

    Name Code Standards
    Welding and cutting metals. Soldering, riveting В05 GOST 16130-90
    Bars В55 GOST 1628-78, OST 4.021.021-92, OST 4.021.038-92, OST 4.021.042-92, TU 48-21-60-80
    Non-ferrous metals, including rare, and their alloys В51 GOST 18175-78, GOST 28873-90, OST 4.021.009-92
    Sheets and strips В53 GOST 4748-92, OST 4.021.068-92
    Wire from nonferrous metals and their alloys В74 GOST 5222-72, GOST Р 54150-2010, OST 4.021.106-92, OST 4.021.113-92
    Tape В54 OST 4.021.081-92, TU 48-21-234-85

    Chemical composition

    Standard Mn Si Ni Fe Cu Zn Sn Pb
    GOST 18175-78 1-1.5 2.7-3.5 ≤0.2 ≤0.3 Rest ≤0.5 ≤0.25 ≤0.03
    GOST 16130-90 1-1.5 2.7-3.5 ≤0.2 ≤0.3 Rest ≤0.5 ≤0.25 ≤0.03
    Cu is the basis.
    According to GOST 18175-78, the total mass fraction of normalized impurities is ≤ 1.0%. According to the manufacturer's agreement with the consumer, up to 2.0% of iron is allowed without taking it into account in the total amount of impurities, and also the content of impurities of arsenic, antimony and phosphorus can be normalized.

    Mechanical properties

    Section, mm sT|s0,2, MPa σU, MPa d5, % d10 HB, MPa
    Band of 1.8-10.0 mm as supplied by OST 4.021.068-92 (samples transverse)
    - - ≥350 - ≥35 -
    - - ≥760 - - -
    - 270-500 470-590 - ≥10 -
    - 500-740 590-760 - ≥5 -
    Strip and cold-rolled strips, as supplied by the 4748-92 GOST, OST 4.021.081-92 (samples transverse)
    ≥0.5 - ≥350 - ≥35 -
    0.1-0.15 - ≥350 - - -
    0.15-0.45 - ≥350 - ≥28 -
    ≥0.1 - ≥760 - - -
    ≥0.5 - 470-590 - ≥10 -
    0.1-0.15 - 470-590 - - -
    0.15-0.45 - 470-590 - ≥5 -
    ≥0.5 - 590-760 - ≥5 -
    0.1-0.15 - 590-760 - - -
    0.15-0.45 - 590-760 - ≥2 -
    Square cold-drawn wire, General purpose, solid (untreated) supplied by OST 4.021.113-92 (longitudinal samples)
    0.6-1 - ≥880 - - -
    1.2-2.5 - ≥880 - ≥0.5 -
    3 - ≥830 - ≥1 -
    The round cold-drawn wire, General purpose, solid (untreated) supplied by OST 4.021.106-92 (longitudinal samples)
    0.1-1 - ≥880 - - -
    1.1-2.6 - ≥880 - ≥0.5 -
    2.8-4.2 - ≥830 - ≥1 -
    4.5-8 - ≥810 - ≥1.5 -
    8.5-10 - ≥760 - ≥2 -
    Rods are supplied according to GOST 1628-78. 4.021.021-92 (longitudinal samples)
    30-100 - ≥390 - ≥15 -
    30-120 - ≥340 - ≥20 ≥65
    13-41 - ≥490 - ≥15 ≥150
    5-12 - ≥490 - ≥10 ≥150
    Bars drawn square to EAST 4.021.038-92 (longitudinal samples)
    14 - ≥490 ≥15 - ≥150
    5-12 - ≥490 ≥10 - ≥150
    Bars drawn on hex OST 4.021.042-92 (longitudinal samples)
    14 - ≥490 ≥15 - ≥160
    5-12 - ≥490 ≥10 - ≥160

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    d10 Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature Е, HPa r, kg/m3 l, W/(m · °C) R, Mr. · m
    20 115 8470 46 250

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    r Density
    l Coefficient of thermal conductivity
    R UD. the resistivity