Belt composition and qualities

The composition of the tape of high-alloy heat-resistant steel 10Х17Н13М2Т (AISI 316Ti), contains: 0,1% of carbon, about 17-20% Cr, 13% Ni, 2% Mo, up to 1% Ti. The remainder is iron. The more chromium in the alloy, the higher the corrosion resistance. At 17%, Cr and above, the strip becomes resistant to the effects of aggressive oxidizing environment. Nickel not only increases corrosion resistance, but also gives plasticity and impact resistance. And without molybdenum and titanium, the belt would not be as heat-resistant and durable. Such qualities as wear resistance, strength, corrosion resistance, aesthetic attractiveness have made it very popular in the rolled metal market.

Percentage composition of the alloy GOST 5632-72

Technological qualities

_σB - ultimate short-term strength;

_σT - yield strength for permanent deformation.

Application

Various kinds of fasteners for the production of automotive parts and body parts; in the sphere of mechanical engineering and household appliances, for the purpose of decoration of furniture, for the production of conveyor belts, fences, etc.It is used for mounting of intermediate and anchor clamps, brackets and other elements to power transmission line supports, fastening to air compressor pipelines of heating cables etc. Such stainless steel band is popular in mechanical engineering, machine-tool construction and construction, instrumentation - in the manufacture of a variety of electrical equipment. An important advantage of the tape is the ability to produce different parts from one roll as needed. For example, various clamps, small parts of fasteners to order, brackets. Trimmings can also be used for small parts, which saves material. Tape is usually made easy to handle and soft, but there is also the option of ordering a pressed version.

Buy at the best price

Evek GmbH sells a wide range of stainless steel strip at the best prices. The assortment of stainless steel tape perforated, mounting, etc. The tape is delivered in thickness of 0,05-28 mm and width of 2-1000 mm, usually in coils. Fixing tape has the width of 20±0.5 mm, thickness 0.05-28 mm, weight 0.12-0.13 kg/m, with the breaking load not less than 5 kN. This type of tape is used as a special dimensionless "clamp", which is fixed with a lock after being tightened on site with a special tool. Tape of foreign production (AISI 316Ti) is produced in rolls with width from 6 up to 1500 mm. The weight of these coils is quite large. We offer a system of discounts to wholesale customers, partners and regular customers.