Soldering

Use solder PIC 40, even better solder PIC 50, PIC 61. Flux should be prepared in a ceramic mortar, consistently add zinc chloride and glycerin, stir until a homogeneous mass. Soldering of nichrome, constantan, manganine, beryllium and aluminum bronze is carried out at 300 °C. The soldered ends are carefully cleaned with an abrasive cloth and wiped with absorbent cotton in a 10% alcohol solution of copper chloride, fluxed, tinned and then soldered.

Welding

The advantage of welding is that during operation, even from the high heat welded contact is not broken. It is necessary to heat the welding place up to red hot. A particle of lapis (silver nitrate) is placed on this point with tweezers, which melts when heated and forms a firm contact at the joint. If the Ø welded wire is less than 0.15-0.2 mm, its ends are superimposed on each other (distance 15-20 mm) and a thin copper wire Ø 0.1-0.15 mm is coiled on them. Then the wire, connected in this way, is heated with a gas torch. This causes the copper to melt and firmly connects the ends of the nichrome wire.

Supplier

We offer to buy nichrome from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with modern quality standards. The supplier Evek GmbH offers to buy nichrome, the price is optimal in this segment of rolled products. Timely delivery is provided by representative offices in Eastern European cities.

Buy, bargain price

Supplier Evek GmbH offers nichrome, price - determined by the technological features of production without including additional costs. The company's website displays information about the latest arrivals of products. It is possible to order products with non-standard parameters. Buy nichrome and any other nickel alloys today. We have the best price-quality ratio for the entire range of products. In the segment of nickel alloys, Evek GmbH is a profitable supplier.