Preparing the metal for cutting

Are you interested in preparing metal for cutting? Evek GmbH offers metal cutting at the manufacturer's price. The supplier provides the necessary information support, guarantees timely delivery of products to the consumer. You can buy rolled metal products today. The price is optimal.

Sequence of operations

The accuracy and productivity of cutting sheet and section rolled products is determined by the quality of preparatory operations, such as:

  1. Straightening of rolled products.
  2. Straightening (slight, up to 3...5% compression);
  3. Degreasing.

When cutting by mechanical method, additional mechanical cleaning of the surface from small metal particles and slag is performed. Labor intensity of transitions increases if we use sheets and hot-rolled profiles as blanks, which always have a thick layer of scale on them. Scale build-up causes increased wear on cutting tools. Evek GmbH offers to buy at an affordable price equipment for preparatory operations before the cutting of rolled products into dimensional blanks. The supplier guarantees timely delivery of products to the address specified by the customer.

Equipment

Multi roll straightening machines are used for straightening sheet metal. They are rotary action equipment. The sheet is tucked into the gap between the rolls and then straightened as the metal passes through. In modern designs, straightening and dressing of rolled billets can be performed simultaneously. According to a similar structural scheme and operate section straightening machines in which corrected angles, bars, channels.

Straightening

A special technology of straightening is developed for wire for cold heading operations. Straightening is carried out by a straightening machine immediately before cutting, which means that time-consuming preparation of the rolled section for cutting is not increased. After straightening the input blanks go to the degreasing line, where the final removal of organic contaminants (oils, greases, emulsions , etc.) takes place.

Buy. Supplier, price.

Are you interested in preparing metal for cutting? Evek GmbH offers metal cutting at a manufacturer's price. The supplier Evek GmbH provides the necessary information support, guarantees the timely delivery of products to the consumer. You can buy rolled metal products today. The price is optimal.