X15Y5, astm B603. Fechral ribbon and wire with the designation Cr15Al5
Vendor
Supplier Evek GmbH offers to buy Fehrale band, wire Х15Ю5 at the price of the most optimal in the given segment of rolled products. We offer to buy fkhrale band, wire X15U5 from specialized warehouses of Evek GmbH with delivery in any city. Full compliance with modern quality standards. Timely delivery is provided by representative offices in Eastern European cities.
Technical characteristics
Precision alloy with high electrical resistance. Hardness HB 10 -1 = 150 - 200 MPa. Used for resistive elements as well as for electric heating devices.
Percentage composition of GOST 10994-74
The name "Fehral" consists of the names of its constituent parts: ferum - "fe", chromium - "chr", aluminum - "al". The basis of the alloy is iron. Its share in the alloy, as a rule, is over 70%. The alloy is additionally alloyed with manganese, silicon, titanium, and nickel.
| Fe | C | Si | Mn | Ni | S | P | Cr | Ce | Ti | Al | Ca |
| basis | ≤0.08 | ≤0.7 | ≤0.7 | ≤0.6 | ≤0.015 | ≤0.03 | 13.5 - 15.5 | ≤0.1 | 0.2 - 0.6 | 4.5 - 5.5 | ≤0.1 |
| Range | s in | sT | d5 | y | KCU |
| - | MPa | MPa | % | % | kJ/m2 |
| Tape | 736 | 12 |
| t°C | a 10 6 | r | C | R 10 9 |
| Degree | 1/Grad | kg/m3 | J/(kg-degree) | Ohm-m |
| 20 | 7280 | 1.30 ±0.05 | ||
| 100 | 16 | 480 |
Sv - Ultimate Short-Term Tensile Strength
sT - Limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
C - Specific heat capacity
a - Coefficient of thermal (linear) expansion
KCU? - Impact viscosity
r - specific gravity
R - specific electrical resistance
Buy, bargain price
Supplier offers Fehral tape, wire X15Yu5, the price - due to the technological features of production without the inclusion of additional costs. On the website of Evek GmbH information about the latest arrivals of products is available. Precision alloys are always available, the price is optimal from the supplier.
