Wire, circle, bar 15x5m - 1.7362 - aisi 501
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 15X5M | X5M | 1.7362 | 501 | X12CrMo5 | Delivery from the stock, in stock |
Technical characteristics
Stainless heat-resistant low-alloy martensitic steel. The base of the alloy is iron: its share is about 92%. /The composition is alloyed with chrome, nickel, vanadium, tungsten, manganese, titanium, copper. Used in the manufacture of pipes, fittings, valves, fasteners and similar items operating at t ° up to 600 ° C; Service life over 10000 hours. The temperature of intensive scale formation 650 ° C ;
Percentage composition
| Fe | C | Si | Mn | Ni | S | P | Cr | Mo | W | V | Ti | Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| basis | ≤0.15 | ≤0.5 | ≤0.5 | ≤0.6 | ≤0.025 | ≤0.03 | 4.5 - 6 | 0.45 - 0.6 | ≤0.3 | ≤0.05 | ≤0.03 | ≤0.2 |
Hardness (after heat treatment) HB 10-1 170- 217 MPa. Tendency to temper embrittlement:
Mechanical properties (t° 20°C)
| Range | GOST | For example | s in | sT | d5 | y | KCU | Heat treatment |
|---|---|---|---|---|---|---|---|---|
| - | mm | MPa | MPa | % | % | kJ/m2 | - | |
| Hot-deformed pipe | 550-75 | 392 | 216 | 22 | 50 | 1180 | ||
| Rods | 20072-74 |
Ø 90 | 390 | 215 | 22 | 50 | 1180 | Annealing 840 - 860 °C, cooling furnace, |
| Sheet thick, | 7350-77 | 470 | 235 | 18 | Annealed at 840 - 870 °C, air cooled, |
Physical properties
| t° | E 10- 5 | a 10 6 | l | specific gravity | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | N/mm2 | 1/Gradus | W/(m-grad) | gc/m3 | J/(kg-grad) | Ohm-m |
| 20 | 2.11 | 7,75 | 430 | |||
| 100 | 11.3 | 37 | 7,73 | 483 | ||
| 400 | 1.78 | 12.2 | 34 | 7,64 | ||
| 600 | 1.02 | 12.5 | 32 | 7,58 |
sB - Ultimate short-time strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile strain at break
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - specific heat capacity
Analogues
| EU | Germany | Italy | China | Poland | USA | France | Czech Republic |
|---|---|---|---|---|---|---|---|
| EN | DIN, WNr | UNI | GB | PN | AFNOR | CSN | |
| 1.7362 | 1.7362 | A16CrMo25-5KG |
10MoCr50 | H5M | 501 | 710CD5-05 | 17102 |
| 5CrMo16 | 12CrMo19-5 |
A16CrMo25-5KW | 502 | Z15CD5-05 | |||
| T5 |
K41545 | Z20CD5 | |||||
| X12CrMo5 | X12CrMo5 |
S50100 | |||||
| S50200 | |||||||
| T12005 | |||||||
| T51605 |
Supplier
Buy wire, rounds, bars 15x5m (X5M) from warehouse of supplier Evek GmbH. Full compliance with international quality standards. The supplier Evek GmbH offers to buy wire, round, bar 15x5m (X5M), today the best price.
Buy, bargain price.
We offer wire, round, bar 15x5m (X5M), the price - does not include additional costs. In the segment of stainless steel, the company Evek GmbH is a profitable supplier.