Sheet, strip 15x5m - 1.7362 - aisi 501
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 15X5M | X5M | 1.7362 | 501 | X12CrMo5 | Delivery from the stock, in stock |
Supplier
Buy sheet, strip 15x5m - 1.7362 - aisi 501 from warehouse of supplier Evek GmbH. Full compliance with international quality standards. The supplier Evek GmbH offers to buy sheet, strip 15x5m (X5M) - aisi 501, today's best price.
Technical characteristics
Stainless heat-resistant low-alloy steel of martensitic class. The basis of the alloy - iron: its share of about 92%. /The composition is alloyed with chrome, nickel, vanadium, tungsten, manganese, titanium, copper. Used in the manufacture of pipes, fittings, valves, fasteners and similar items operating at t ° up to 600 ° C; Service life over 10000 hours. The temperature of intensive scale formation 650 ° C ;
Percentage composition
| Fe | C | Si | Mn | Ni | S | P | Cr | Mo | W | V | Ti | Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| basis | ≤0.15 | ≤0.5 | ≤0.5 | ≤0.6 | ≤0.025 | ≤0.03 | 4.5 - 6 | 0.45 - 0.6 | ≤0.3 | ≤0.05 | ≤0.03 | ≤0.2 |
Hardness (after heat treatment) HB 10-1 170- 217 MPa. Tendency to temper embrittlement:
Mechanical properties (t° 20°C)
| Range | GOST | For example | s in | sT | d5 | y | KCU | Heat treatment |
|---|---|---|---|---|---|---|---|---|
| - | mm | MPa | MPa | % | % | kJ/m2 | - | |
| Hot-deformed pipe | 550-75 | 392 | 216 | 22 | 50 | 1180 | ||
| Rods | 20072-74 |
Ø 90 | 390 | 215 | 22 | 50 | 1180 | Annealing 840 - 860 °C, cooling furnace, |
| Thick sheets | 7350-77 | 470 | 235 | 18 | Annealed at 840 - 870 °C, air cooled, |
Physical properties
| t° | E 10- 5 | a 10 6 | l | specific gravity | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | N/mm2 | 1/Gradus | W/(m-grad) | gc/m3 | J/(kg-grad) | Ohm-m |
| 20 | 2.11 | 7,75 | 430 | |||
| 100 | 11.3 | 37 | 7,73 | 483 | ||
| 400 | 1.78 | 12.2 | 34 | 7,64 | ||
| 600 | 1.02 | 12.5 | 32 | 7,58 |
sB - Ultimate short-time strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile strain at break
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - specific heat capacity
Analogues
| EU | Germany | Italy | China | Poland | USA | France | Czech Republic |
|---|---|---|---|---|---|---|---|
| EN | DIN, WNr | UNI | GB | PN | AFNOR | CSN | |
| 1.7362 | 1.7362 | A16CrMo25-5KG |
10MoCr50 | H5M | 501 | 710CD5-05 | 17102 |
| 5CrMo16 | 12CrMo19-5 |
A16CrMo25-5KW | 502 | Z15CD5-05 | |||
| T5 |
K41545 | Z20CD5 | |||||
| X12CrMo5 | X12CrMo5 |
S50100 | |||||
| S50200 | |||||||
| T12005 | |||||||
| T51605 |
Buy, bargain price.
We offer sheet, strip 15x5m (X5M), the price - does not include additional costs. Evek GmbH is a profitable supplier in the stainless steel segment.