Stainless steel strip
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 12X18H10T | EP2 | 1.4541 | 321 | X12CrNiTi18-10 | Delivery from the stock, in stock |
| 12Х18Н10Т-Н | EP2 | 1.4541 | 321 | X12CrNiTi18-10 | Delivery from the stock, in stock |
| 12X18H10T-M | EP2 | 1.4541 | 321 | X12CrNiTi18-10 | Delivery from the stock, in stock |
| 12Х18Н10Т-В | EP2 | 1.4541 | 321 | X12CrNiTi18-10 | Delivery from the stock, in stock |
| 12X18H10T-TS | Delivery from the stock, in stock | ||||
| 12Х18Н10Т-ТС-1 | Delivery from the stock, in stock | ||||
| 20X23H13 | EI319 | Delivery from the stock, in stock | |||
| 20X13 | EJ2 | 1.4021 | 420 | X20Cr13 | Delivery from the stock, in stock |
| 40X13 | EJ4 | 1.4034 | 420 | X46Cr13 | Delivery from the stock, in stock |
Manufacturing of stainless steel strip
Hot and cold rolling methods are used. Such strip has no cavities inside and is produced according to GOST 5632−61 exclusively of the following grades of heat-resistant, corrosion-resistant and heat-resistant steel:
— nickel-containing: 08Х18Н10Т, 10Х17Н13МДТ, 12Х18Н10Т, 23Х23Н18;
— Non-nickel-containing steels: 15Cr25T, 95Cr18 and 40Cr13.
Percent composition of 12X18N10T (GOST 5632−72)
| С | Si | Mn | Cr | Ni | Ti | Р | S | Cu |
|---|---|---|---|---|---|---|---|---|
| 0,12 | 0,8 | 2,0 | 17,0−19,0 | 9,0−11,0 | 5 С-0,8 | 0,02 | 0,035 | 0,30 |
Percentage composition of the alloy GOST 5632−72
| Mark | C | Si | Mo | Cr | Ni | Mn | Cu | Ti | S | P | Fe |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 20CR23NI13 | ≤0,2 | ≤1 | --- | 22−25 | 12−15 | ≤2 | ≤0,3 | ≤0,2 | 0,025 | 0,035 | base |
Percentage composition of 20X13 grade (GOST 5632−72)
| Alloy | C | Si | Mn | Ni | Cr | P | S | Ti | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 20Х13 | 0,16−0,25 | ≤0,6 | ≤0,6 | ≤6 | 12−14 | ≤0,03 | ≤0,025 | --- | base |
Percentage composition of 40X13 grade (GOST 5632−72)
| Alloy | C | Si | Mn | Ni | Cr | P | S | Ti | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 40Х13 | 0,35−0,44 | ≤0,6 | ≤0,6 | ≤0,6 | 12−14 | ≤0,03 | ≤0,025 | --- | base |
The strip is classified:
By accuracy and quality of rolling:
— increased accuracy category «A»;
— high precision category «B»; — high precision category «B»;
— Normal — «C».
By length:
— out of gauge length;
— of measured length.
Cross-sectional thickness of stainless steel strip in accordance with the requirements of GOST 4405−75 is 4−60 mm, and its width is up to 200 mm.
Application
Stainless steel strip is indispensable for the manufacture of complex bent profiles and metal structures. It is used for manufacturing springs, cutting tools, for decorative finishing of arches, columns and other architectural elements. It gives the product an exquisite look, protects against corrosion and temperature changes. Galvanized strip can be for a long time in a corrosive environment or in the open air. These qualities make it popular in the gas production and oil refining industries. Those industries that operate under strict sanitary requirements also often use stainless steel strip. This is the food and medical industry. It is impossible to imagine construction without this type of rolled steel. Most building structures are made precisely from galvanized strip and stainless steel strip.
Buy at the best price.
Evek GmbH has a wide range of stainless steel strip of the highest quality in stock. In the technical documentation includes data on the chemical composition and properties of steel, the limiting percentage of impurities; mechanical properties of products. Products are ultrasonically tested for absence of shrinkage looseness, bubbles, cracks and slag inclusions. Implementation of orders — in the shortest possible time. Wholesale customers receive preferential discounts.