Steel R6M5F3-MP (ДИ99-MP)

  • Steel R18F2K8M (EP379)
  • Steel R9F5 (EI706)
  • Steel R9M4K8-MP (DI102-MP)
  • Steel R9M4K8
  • Steel R9M4K6S (EP722)
  • R9K5 steel
  • P9 steel
  • Steel R8F2K8M5 (EP658)
  • Steel R7M2F6-MP (DI100-MP)
  • Steel R6M5F3-MP (DI99-MP)
  • R6M5F3 steel
  • Steel R6M5K5-MP (DI101-MP)
  • R6M5K5 steel
  • R6M5 steel
  • P6AM5 steel
  • P2AM9K5 steel
  • Steel R18K5F2 (EI940)
  • R18 steel
  • R14F4 steel
  • Steel R13F4K5 (EP600)
  • Steel R12F3K10M3 (EP682)
  • R12F3 steel
  • Steel R12F2K8M3 (EP657)
  • Steel R12F2K5M3 (EP863)
  • Steel R12MF5-MP (DI70-MP)
  • Steel R12M3K5F2-MP (DI103-MP)
  • Steel 9X4M3F2AGST (EK42)
  • 75KhMF steel
  • Steel 11R3AM3F2 (EP894)
  • Steel 11M5F

    • Designation

    Name The value
    Designation GOST Cyrillic Р6М5Ф3-МП
    Designation GOST Latin P6M5F3-MP
    Transliteration R6M5F3-MP
    By chemical elements -
    Name The value
    Designation GOST Cyrillic ДИ99-МП
    Designation GOST Latin DI99-MP
    Transliteration DI99-MP
    By chemical elements CuИ99-MoP

    Description

    Steel R6M5F3-MP used: for the production of hot rolled and forged strips, hot rolled, forged and calibrated rods, rods with special surface finish produced by hot gas-static pressing (GGP) pulverized powder with subsequent deformation of the blanks; shaped cutters, drills, reamers, core drills, taps, broaches, milling cutters, dalbekov, shaver for treatment of low and medium alloy steels; tools for cold extruding and polygonacea alloy steels and alloys.

    Standards

    Name Code Standards
    Bars and shapes В22 GOST 1133-71, GOST 2590-2006, GOST 2591-2006
    Sheets and strips В33 GOST 4405-75
    Bars and shapes В32 GOST 7417-75, GOST 28393-89

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu N V Mo W O Co
    GOST 28393-89 1.25-1.35 ≤0.03 ≤0.03 ≤0.5 3.8-4.3 ≤0.6 ≤0.4 Rest ≤0.25 0.02-0.06 3.1-3.7 5.5-6 5.7-6.7 ≤0.02 ≤0.5
    Fe is the basis.

    Technological properties

    Name The value
    Sanding behaviour 1,00-1,20 relative to steel of grade R6M5.
    Wear resistance tool life 1,30-1,80 in comparison with steel R6M5F3 and 2.0 to 5.0 in comparison with steel KH12MF. Tensile strength in bending 3500-4400 Psi.