Steel 11KH4V2MF3S2 (ДИ37)

  • 9X1 steel
  • Steel 9X5VF
  • Steel 9G2F (EI972)
  • Steel 95Kh6M3F3ST (EK80)
  • Steel 90KhF (9Kh1F; 9KhF)
  • 8XF steel
  • Steel 8Kh6NFT (85Kh6NFT)
  • Steel 8X4V2MFS2 (EP761)
  • Steel 8X3
  • Steel 8H1A
  • 7CrNiM steel
  • 7ХГ2ВМФ steel
  • 7X3 steel
  • Steel 7X15VMFSN (ChS93)
  • 7H2MFA steel
  • 6HS steel (EI325)
  • 6XVG steel
  • X12VMF steel
  • CGS steel
  • CVCGF steel
  • CVG steel
  • CV4F steel
  • X9VMF steel
  • Steel Х6ВФ (ЭИ808)
  • X12F1 steel
  • X12MF steel
  • 6XV2S steel
  • X12 steel
  • Steel X
  • B2F steel
  • 9KhFM steel
  • 9XS steel
  • Steel 9KhVG
  • Steel 9X6F2ARSTG (EC15)
  • Steel 3X3M3F (EI76)
  • 4XMF steel
  • 4XMNFS steel
  • Steel 4Х5МФС (4Х5МФСА)
  • Steel 4Х5МФ1С (EP572)
  • Steel 4X5V2FS (EI958)
  • 4X4VMFS steel (DI22)
  • 4X3VMF steel (ZI2)
  • Steel 4Х2В5МФ (ЭИ959)
  • 4KhMFS (40KhSMF) steel
  • 3X2MNF steel
  • 13X steel
  • Steel 12X1 (EP430)
  • Steel 11KhF (11Kh)
  • Steel 11Х4В2МФ3С2 (DI37)
  • Steel 05X13H6M2
  • Steel 05Х12Н6Д2МФСГТ (DI80)
  • Steel 6Х7В7ФМ (ЭИ161)
  • 4HS steel
  • Steel 50X14MF (ЗИ128)
  • Steel 55CM5FA
  • Steel 55Kh7VSFM (55Kh7VSMF)
  • Steel 5Х2МНФ (DI32)
  • Steel 5Х3В3МФС (DI23)
  • 5XANMF steel
  • 5KhV2SF steel
  • Steel 5KhNV (5KhNVL)
  • 5KhNVS steel
  • 5CrNiM steel
  • 6X3MFS steel (EP788)
  • 6X4M2FS steel (DI55)
  • 6X6V3MFS steel (EP569)
  • 6X6M1F steel

    • Designation

    Name The value
    Designation GOST Cyrillic 11Х4В2МФ3С2
    Designation GOST Latin 11X4B2MF3C2
    Transliteration 11H4V2MF3S2
    By chemical elements 11Cr4W2MoV3С2
    Name The value
    Designation GOST Cyrillic ДИ37
    Designation GOST Latin DI37
    Transliteration DI37
    By chemical elements CuИ37

    Description

    11KH4V2MF3S2 steel is used: for the manufacture of blanking dies, including processing of cold rolled electrical steel Э412 and Э413 with coatings of type «Karlit»; of punches and dies of cold heading machines; punches and ejectors for cold extruding, operated with a specific pressure up to 2000 MPa in conditions of high wear and heating of working surfaces up to 400 °C; the spline and thread rolling tool.

    Standards

    Name Code Standards
    Sheets and strips В33 GOST 4405-75
    Bars and shapes В32 GOST 5950-2000, GOST 14955-77

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu V Ti Mo W
    GOST 5950-2000 1.05-1.15 ≤0.03 ≤0.03 0.2-0.5 3.5-4.2 1.4-1.8 ≤0.4 Rest ≤0.3 2.3-2.8 ≤0.4 0.3-0.5 2-2.7
    Fe is the basis.