Alloy CAM10-5 (CAM10-5L)

  • Alloy TsAM10-5 (TsAM10-5L)
  • Alloy ZAM9-1.5 (ZAM9-1.5L)

    • Designation

    Name The value
    Designation GOST Cyrillic ЦАМ10-5
    Designation GOST Latin TsAM10-5
    Transliteration TsAM10-5
    By chemical elements ZnAlCu10-5
    Name The value
    Designation GOST Cyrillic ЦАМ10-5Л
    Designation GOST Latin TsAM10-5L
    Transliteration TsAM10-5L
    By chemical elements ZnAlCu10-5

    Description

    Alloy CAM10−5 is used: for the manufacture of bushings and bearings; castings; parts of friction units produced by the strain and operating at temperatures up to 80−100 °C; casting parts, metallurgical engineering (as a substitute for tin bronze in bearings and bushings for different units operating at low speeds; small bearings of rolling mills, eccentric shafts and clutches in a curved, eccentric and friction presses, chassis, wheels, valves and crankshaft, an oscillating gratings ore-dressing machinery); castings bearings and bushings for different units; rolling lanes for slideways of machine tools and other products.

    Note

    The coefficient of friction of the alloy without lubrication of 0.35, with grease — 0,009. The maximum allowable rotation speed — 7 m/sec. Maximum load capacity: static — 200 kgf/cm2, dynamic — 100 kgf/cm2 sec.
    Conditions of operation:
    — castings bearings and bushings for different units (CAM10−5L) — specific pressure ≤ 9.8 MPa; sliding speed ≤ 8 m/s; temperature ≤ 80 °C;
    — rolling strip for guideways of machine tools and other products (CAM10−5) — specific pressure ≤ 19.6 MPa; sliding speed ≤ 8 m/s; temperature ≤ 80 °C.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 21437-95, GOST 21438-95, STP М320-74
    Castings, non-ferrous metals and alloys В84 OST 24.916.01-71
    Sheets and strips В53 TU 48-21-738-82

    Chemical composition

    Standard Si Fe Cu Al Zn Sn Pb Mg Cd
    OST 24.916.01-71 ≤0.1 ≤0.2 4-5.5 10-12 Rest ≤0.01 ≤0.03 0.03-0.06 ≤0.02
    STP М320-74 ≤0.1 ≤0.15 4-5.5 9-12 Rest ≤0.01 ≤0.03 0.03-0.06 ≤0.02
    GOST 21438-95 ≤0.03 ≤0.1 4-5.5 9-12 Rest ≤0.01 ≤0.02 0.03-0.06 ≤0.015
    Zn is the basis.
    According to GOST 21437-95 and OST 24.916.01-71 the total content of impurities is ≤ 0.35%.
    According to GOST 21438-95 the chemical composition is given for alloy TsAM10-5 in pigs.
    According to STP M320-74, the chemical composition is given for the casting alloy TsAM10-5L.

    Mechanical properties

    Section, mm σU, MPa d5, % HB, MPa
    The mechanical properties of the alloy according to GOST 21437-95
    ≥343 ≥4 ≥90
    ≥245 ≥0.4 ≥100

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature Е, HPa r, kg/m3 l, W/(m · °C)
    20 90 6300 1008

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    l Coefficient of thermal conductivity
    R UD. the resistivity