Alloy 5Х14В (5ХВ14)

  • Alloy 52K12F (52KFB)
  • Alloy UNDK24
  • Alloy EX9K15M2
  • Alloy EX5K5
  • Alloy EX3
  • Alloy EB6
  • Alloy 5X14V (5XV14)
  • Alloy 52KFTM
  • Alloy 52KF
  • Alloy 52K9F (52KF9)
  • Alloy 52K7F (52KF7)
  • Alloy 52K5F (52KF5)
  • Alloy 52K13F (52KFA)
  • Alloy 52K11F (52KFV)
  • Alloy 52K10F (52KF11)
  • Alloy 40KNB (EP966)
  • Alloy 35KH8F
  • Alloy 35KX6F
  • Alloy 35KX4F
  • Alloy 35KX15
  • Alloy 35KX12
  • Alloy 25X15KYUBF (EC33; 25X15K1)
  • Alloy 25NY
  • Alloy 22Kh15KTF (EK159; 22Kh15KA)
  • Alloy 20NCHG (EP298)

    • Designation

    Name The value
    Designation GOST Cyrillic 5Х14В
    Designation GOST Latin 5X14B
    Transliteration 5H14V
    By chemical elements 5Cr14В
    Name The value
    Designation GOST Cyrillic 5ХВ14
    Designation GOST Latin 5XB14
    Transliteration 5HV14
    By chemical elements 5CrВ14

    Description

    Alloy 5Х14В used: for the manufacture of parts of the active part of the rotor of hysteresis motors.

    Note

    The alloy has a high magnetic energy and a reserve of technological plasticity (deformability), which allows to be produced parts of complex shapes.

    Standards

    Name Code Standards
    Bars and shapes В32 TU 14-1-918-74

    Chemical composition

    Standard C S P Mn Cr Si Fe W
    TU 14-1-918-74 ≤0.05 ≤0.02 ≤0.02 ≤0.4 4.5-5.5 ≤0.3 Rest 13.5-14.5
    Fe is the basis.
    When the magnetic properties are in accordance with the requirements of TU 14-1-918-74, the chemical composition is optional and the rejection sign is not.

    Technological properties

    Name The value
    Magnetic properties On the other 14-1-918-74 magnetic properties of bars determined on annealed toroidal samples with an inner diameter of 20 mm, an outer diameter of 30 mm and a height of 5 mm, turned from bars, rods. Mode toroidal samples heat treatment: Heating in a barium bath at a temperature of 1250-1300 °C (extract 3 minutes) + Quenching in oil + [First sample - Vacation at 690-710 °C (aging for 1 h), air cooling], [the Second sample - Vacation at 740-760 °C (aging for 1 h), air cooling]. The measurement of magnetic properties is performed at a constant current of a ballistic method in the maximum permeability. The magnetic properties of the samples heat-treated forged rods in the maximum permeability (Нmμ) 70-90 E. should be: - Maximum induction (Вmμ) ≥9500 GS; - the coercive force (Нсμ) ≥50 e; - residual induction (Вrμ) ≥7500 Gauss; - losses on hysteresis to Нmμ ≥1500 erg/cm3·E. Magnetic properties of the samples heat-treated hot-rolled sheets in the maximum permeability (Нmμ) 75-100 C. should be: - Maximum induction (Вmμ) ≥9000 GS; - the coercive force (Нсμ) ≥50 e; - Residual induction (Вrμ) ≥7000 GS; - Specific losses hysteresis RG ≥125000 erg/cm3.