Aluminium A99

  • Aluminum A0
  • Aluminum A35
  • Aluminum A5
  • Aluminum A5E
  • Aluminum A6
  • Aluminum A7
  • Aluminum A7E
  • Aluminum A8
  • Aluminum A85
  • Aluminum A95
  • Aluminum A97
  • Aluminum A98
  • Aluminum A99
  • Aluminum A995
  • Aluminum A7E

    • Designation

    Name The value
    Designation GOST Cyrillic А99
    Designation GOST Latin A99
    Transliteration A99
    By chemical elements -

    Description

    Aluminium A99 applies: for the production of billets cast by semi-continuous method or continuous casting, and is intended for rolling into sheets, strip for anodes of oxide-semiconductor capacitors and other semi-finished products; metered-dose granules of aluminium for the manufacture of elements of the circuits (the conductive plates of a film capacitor) by vacuum-thermal deposition; the foil used to manufacture capacitors; ingots, wire; wire for wire and cables and also wire for welding (Sva99) and for other purposes; aluminium powder Kommandos brands of APS-1, APS-1B, APS-2, APS-3 is intended for the production teploperenosa deformable material type SAP.

    Note

    High purity aluminium.
    Aluminum grade A99 corresponds to the chemical composition of the marches of aluminium EN AW-1199 established in the European standard EN 573−3-94 and Marche 1199, registered by the American aluminum Association.

    Standards

    Name Code Standards
    Hard alloys, ceramic-metal products and metal powder В56 GOST 10096-76
    Bars and shapes В52 GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92
    Sheets and strips В53 GOST 25905-83, TU 1-83-47-84
    Non-ferrous metals, including rare, and their alloys В51 GOST 4004-64, GOST 4784-97, GOST 9498-79, GOST 11069-2001, GOST 11070-74, GOST 19437-81, TU 11-ЕТ0.021.051ТУ-76
    Wire from nonferrous metals and their alloys В74 OST 1 92005-2002, TU 48-21-574-77
    Tape В54 TU 48-21-509-85, TU 1-2-426-87, TU 48-0810-181-89

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Zn Mg
    GOST 19437-81 ≤0.002 ≤0.003 ≤0.003 ≤0.002 ≥99.99 ≤0.002 ≤0.003 ≤0.001
    GOST 4784-97 - ≤0.003 ≤0.003 ≤0.003 ≥99.99 - ≤0.003 -
    Al is the base.
    According to GOST 19437-81 and GOST 11069-2001, the Ga content is 0.0030%. The content of other impurities (each individually) is ≤ 0.001%. The total content of all impurities is ≤ 0.010%.
    According to GOST 4784-97, the chemical composition is given for the welding wire of the brand SvA99. The ratio of iron and silicon should not be more than one. The content of other impurities (individually) ≤ 0.001%, the total content of all impurities ≤ 0.010%.

    Mechanical properties

    σU, MPa d5, %
    The sheet is thin. After annealing
    ≥110 ≥24

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture