Aluminium A6

  • Aluminum A0
  • Aluminum A35
  • Aluminum A5
  • Aluminum A5E
  • Aluminum A6
  • Aluminum A7
  • Aluminum A7E
  • Aluminum A8
  • Aluminum A85
  • Aluminum A95
  • Aluminum A97
  • Aluminum A98
  • Aluminum A99
  • Aluminum A995
  • Aluminum A7E

    • Designation

    Name The value
    Designation GOST Cyrillic А6
    Designation GOST Latin A6
    Transliteration A6
    By chemical elements -

    Description

    Aluminium A6 is used: for the production of pigs, ingots, wire rod, flat ingots, cast by semi-continuous method or continuous casting, and is intended for rolling into sheets, strips and other semi-finished products; extruded pipes with controlled inner diameter from 14 to 42 mm for heat exchangers; heat exchangers evaporators and condensers with two-sided bulge of the channel used in domestic refrigerators and freezers; foil used to manufacture capacitors; roll foil used for thermal, hydro and sound insulation; cold-rolled foil intended for packaging food, medicines, medical products, products of the cosmetic industry and for the production of packaging materials based on it; blue foil of 0.05−0.20 mm for electrical equipment of the aircraft industry; aluminum powder brands commandos APS-1A and APS-1B, APS-2, APS-3 is intended for the production teploperenosa deformable material type SAP.

    Note

    Aluminium technical purity.
    Aluminum grade A6 corresponds to the chemical composition of the marches of aluminium EN AW-1060, installed in the European standard EN 1060 and 573−3-94 Marche, was the American aluminum Association.

    Standards

    Name Code Standards
    Hard alloys, ceramic-metal products and metal powder В56 GOST 10096-76
    Tape В54 GOST 1018-77, GOST 13726-97, TU 1-1-98-88, TU 1-2-133-77, TU 1-2-426-87, TU 1-2-432-82
    Tubes of non-ferrous metals and alloys В64 GOST 18482-79, TU 1-3-67-90, TU 1-3-67-98
    Sheets and strips В53 GOST 618-73, GOST 17232-99, GOST 21631-76, GOST 25001-81, GOST 25905-83, GOST 745-2003, OST 4.021.093-92, TU 1-9-1048-87, TU 1-8-186-2006
    Bars and shapes В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92
    Non-ferrous metals, including rare, and their alloys В51 GOST 9498-79, GOST 11069-2001, GOST 11070-74, GOST 19437-81, OST 4.021.009-92

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Zn Mg
    GOST 11069-2001 ≤0.03 ≤0.18 ≤0.25 ≤0.01 ≥99.6 ≤0.02 ≤0.05 ≤0.03
    Al is the base.
    According to GOST 19437-81 and GOST 11069-2001, the Ga content is ≤ 0.030%. The content of other impurities (each separately) ≤ 0.030%. The total content of all impurities is ≤ 0.40%.

    Mechanical properties

    Section, mm σU, MPa d5, % d
    The tape is supplied according to GOST 1018-77 (samples)
    0.3-0.7 ≥70 - ≥20
    0.3 100-150 - ≥2.5
    0.35-0.7 120-150 - ≥3
    Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
    5-10.5 ≥70 - ≥15
    0.3-0.5 ≥60 - ≥20
    0.5-0.9 ≥60 - ≥25
    0.9-10.5 ≥60 - ≥30
    0.3-0.8 ≥145 - ≥3
    0.8-3.5 ≥145 - ≥4
    3.5-10.5 ≥130 - ≥5
    0.8-4.5 ≥100 - ≥6
    Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse)
    11-25 ≥78 ≥18 -
    25-80 ≥64 ≥15 -
    Extruded aluminum tubes with internal diameter control for heat exchangers as supplied without a heat treatment on the other 1-3-67-90 (in the section you specify an internal pipe diameter)
    14-42 59-98 - ≥28
    Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
    ≥60 ≥20 -

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    d Elongation after rupture

    Physical characteristics

    Temperature r, kg/m3
    20 2700

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    l Coefficient of thermal conductivity
    R UD. the resistivity
    С Specific heat