Sheet, strip 1.4542 - 17-4Ph®
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
1.4534 | S13800 | X3CrNiMoAl13-8-2 | Delivery from the stock, in stock |
Supplier
We offer you to buy a sheet, tape 1.4542 — 17−4Ph® specialist stores supplier Evek GmbH with delivery to any city. Full compliance with the international quality standards. Supplier Evek GmbH offers to buy a sheet, tape 1.4542 — 17−4Ph®, the price is optimal in this segment of the rental.
Technical characteristics
Stainless CR-Ni low carbon martensitic steel grade. Specific gravity of 7.8 g/cm3. The alloy additionally alloyed with copper, manganese, silicon, tantalum; shows excellent combination of high strength and hardness, and excellent corrosion resistance. The alloy can be hardened by using a single-stage low-temperature processing.
Percentage composition EN 10095−1999
Fe | With | Si | Mn | P | S | Cr | Ni | Cb + Ta | Cu |
---|---|---|---|---|---|---|---|---|---|
basis | ≤0,07 | ≤1 | ≤1 | ≤0,04 | ≤0,05 | 15−17 | 3−5 | 5 X C / 0.45 | 3−5 |
Mechanical properties (20°C)
sin the Limit of short-term strength (ksi) 190
sT — yield stress for permanent deformation (ksi) 170
d5 — elongation at break.10%
Cold treatment
Turning, milling, grinding, drilling.
Heat treatment
Normalizing, quenching, annealing, vacation.
Application
Aerospace, chemical, petrochemical, food, paper and metal processing industry.
Analogues
EN/DIN | Mark |
---|---|
EN/DIN | 1.4542 X5CrNiCuNb16.4 |
AFNOR | Z6CNU17-O4 |
ASTM-A564 | Grade 630 |
UNS | S17400 |
JIS | SUS630 |
BRANDS® | AL 17−4™ Custom 630™ |
To buy, best price
Offer sheet, strip 17−4Ph®, the price is determined by the technological features of production without the inclusion of additional costs. You can order products in non-standard settings. We have the best ratio of price and quality for the entire range of products. In the segment of stainless steel company Evek GmbH — best supplier.