Ribbon, strip, sheet 51KhFA - 51CrV4 - 1.8159

Tape, strip, sheet

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
51HFA 1.8159 51CrV4 Delivery from the stock, in stock

The company Evek GmbH offers to buy volumetric rolled products - circles, bars, wires made of 51KhFA, 51CrV4, (1.8159) steels at producer prices. The products are delivered in a wide range of diameters to the location specified by the customer.

Composition and properties

51KhFA grade spring steel is not regularly produced in CIS countries, though its availability is stipulated by GOST 14959. Foreign analogues of steel: in North America - ASTM spring steel (1.8159), in Europe - steel 51CrV4, specifications of which comply with EN 10277 -5.

Chemical composition of steel:

Component Carbon Silicon Manganese Chrome Vanadium
Content in steel, % 0,47...0,55 Up to 0.4 0,7...1,1 0,9...1,2 0,1...0,25

The process of melting steel also includes phosphorus and sulfur, the percentage content of which in the final product should not be more than 0.025%.

The main physical and mechanical characteristics of the steels in question:

  • Ultimate tensile strength, MPa, at least - 1274;
  • Ultimate ductility, MPa, not less - 1127;
  • Relative elongation, %, not less - 10;
  • Relative narrowing of cross-section, %, no less - 40;
  • Brinell hardness, HB - 240...280 (depending on the state of delivery)

The steels of this type lend themselves well to all types of heat treatment - annealing, tempering and hardening. Because of the significant amount of carbon in the material, it is rolled predominantly in the hot state.

As the cross-sectional dimensions decrease, the mechanical properties stated above may be reduced by no more than 5%.

Application

Steel spring 51KhFA, 51CrV4, (1.8159) is used for critical springing of machines and mechanisms under dynamic loading and at temperatures exceeding 180...2500 C. The material is notable for good deformability in the hot state. Welded structures are not made of this steel.

From these steel grades are mainly produced flat springs, torsion springs and springs, which are coiled from wire with the diameter over 30 mm.

Company Evek GmbH offers to buy a circle, bar and wire of steel grades 51KhFA, 51CrV4, (1.8159) at economically advantageous price from the manufacturer. Direct deliveries exclude dispersion of quality indicators of finished products within one batch, and the assortment of profiles always corresponds to the dimensions declared by the customer.