Tape, foil 06XHN28MDT - 1.4539 - aisi 904L
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 06HN28MDT | EI943 | 1.4539 | 904L | X3NiCrCuMoTi27-23 | Delivery from the stock, in stock |
| 06HN28MDT | 926 | 1.4529 | N08926 | X1NiCrMoCuN25-20-7 | Delivery from the stock, in stock |
| 06HN28MDT | 926 | 1.4529 | 904L | X1NiCrMoCuN25-20-7 | Delivery from the stock, in stock |
Relevance
Corrosion-resistant steel 06XHN28MDT on iron-nickel base is used for welded structures designed for operation at the temperature up to 80ºС in acidic environments. This alloy is capable of working for a long time in sulfuric acid of different concentrations, but it quickly loses strength in 55% solution of acetic acid as well as in acids containing phosphorus.
Chemical composition of 06CrNi28MdT
| Cr | Ni | Mn | Si | Cu | Mo | С | Ti | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| 22−25 | 26−29 | up to 0.8 | up to 0.8 | 2,5−3,5 | 2,5−3 | up to 0.06 | 0,5−0,9 | up to 0.035 | up to 0.02 | 36,885−46,5 |
Advantages
The combination of strength, reliability and resistance to corrosive environments make stainless steel tape extremely in demand. The undoubted advantages are not only the aesthetic appeal of designs, but also ease of maintenance. Mechanical properties of 06ХН28МДТ tape are regulated by GOST 4986−78. The specific resistance of the alloy is 0.75 μO-mm2/m, the density of the material is 7.96 g/cm³, the heat capacity of welded structures of the corrosion-resistant alloy is 13 W/(mxK). All the above properties are given at 20ºC.
| t° | E 10- 5 | a 10 6 | Heat capacity | Density |
|---|---|---|---|---|
| Grad | MPa | 1/Grad | W/(mhgrad) | g/cm3 |
| 20 | 13 | 7,96 | ||
| 200 | 1.86 | 12.9 | 15 | |
| 400 | 1.71 | 14.4 | 7,78 | |
| 600 | 1.56 | 15.3 | 24 | |
| 800 | 1.45 | 16.3 | 26 | 7,59 |
Manufacturing
Corrosion-resistant alloy 06KhN28MDT is melted in electric arc furnaces. Final shaping is carried out on rolling mills. Tape is welded by automatic and manual welding in shielding gas with flux. When manual arc welding, electrodes OZL-37−2 and OZL-17U with a rod of welding wire Sv-03KhN25MDG or Sv-02KhN25MDGB are used. The same filler material is used for automatic arc welding. It is recommended to use flux AH-18.
Application
Tape 06ChN28MDT used for the production of welded structures of reactors, tanks or heat exchangers that operate in chemically aggressive environments at temperatures up to 80º C. Welded structures made of this iron-nickel alloy are widely used for manufacturing technological equipment in agrochemistry (for the synthesis of complex mineral fertilizers), as well as equipment designed for the production of welding tools (electrodes). In addition, this alloy is widely used to repair technological equipment operating in a radioactive environment. Tape 06ХН28МДТ can be used as a cladding layer in the production of two-layer hot-rolled corrosion-resistant sheets.
Supply
All the presented 06CrN28MDT products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities; the mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale productions. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.
Buy at the best price
Evek GmbH offers for sale an unlimited range of iron-nickel alloys of the highest quality at a competitive price. If you have difficulty in making a choice, our experienced managers are always available and ready to provide advice. Order with us and you will receive certified products that meet international quality standards in the shortest possible time. If you value your time, contact our nearest office today or place your order online.