Manufacturing

Aluminum alloy strip is a solid metal extruded profile, which has no hollow space in its cross-section. Produced by hot pressing strip aluminum (GOST 8617-81, 22 233-93). In the production process applies such grades of aluminum alloys AD31T5, AD31T1, AD31 and others. Aluminum strip is subjected to anodizing or coated with a polymer paint, which improves the efficiency of the strip and extend its life. The length of aluminum alloy strip ranges from 1 to 6.7 meters. Aluminum strip may have roundings (chamfers) on the corners.

Classification

according to the quality of the material:

- Without heat treatment;

- annealed (M);

- naturally hardened aged (T);

- not completely hardened and artificially aged (T5);

- artificially hardened and aged (T1);

- not completely hardened and naturally aged (T4).

by billet length:

- multiple of measured length;

- partial length;

- measured length.

Accuracy of production:

- normal precision - H;

- high accuracy - B;

- increased accuracy - P.

Depending on coating:

- two-layer complex coating - K;

- polymer powder coating P;

- anodized corners - AN;

- electrophoretic coating GH;

- paint and varnish coating ZHL.

by strength:

- increased strength - PP;

- high durability;

- normal durability.

Use

Strip of aluminum alloys can be used in the electrical industry, in construction, including the creation of billboards, curtain facades, ceilings , etc. Strip of hard aluminum alloys is usually used in the process of finishing works: for example, the closure of the connecting seams.

Dimensions aluminum strip.

Buy at a bargain price.

Aluminum strip anodized or polymer powder-coated (GOST 22 233-93 and 8617-81), sold by Evek GmbH meets the highest requirements. The popularity of aluminum strips is due to the highest quality products, their real price and variety. All products made of aluminum alloys are manufactured by our company under absolute control of the current stages of the technological chain, providing a one hundred percent quality guarantee. Evek GmbH has the ability to produce high quality products with non-standard parameters according to individual orders. Technological capabilities at each stage of production allow us to ensure the production of steel products for individual orders in case of the lack of the necessary type of product in the basic version.