Sheet, strip 40x13 - 1.4034 - aisi 420
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 40X13 | EJ4 | 1.4034 | 420 | X46Cr13 | Delivery from the stock, in stock |
Composition
40X13 martensitic grade sheet, strip, foil consists mainly of iron and chromium. According to GOST 5632−72, composition contains 12−14% Cr and 0.35−0.44% carbon. The alloy is alloyed with such elements as Si, Mn, Ni — 0.6% each, thousandths of phosphorus. Iron makes up the rest. It is melted in open electric arc furnaces, induction furnaces. Substitute: 30X13.
Percent composition of grade 40X13 (GOST 5632−72)
| Alloy | C | Si | Mn | Ni | Cr | P | S | Ti | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 40Х13 | 0,35−0,44 | ≤0,6 | ≤0,6 | ≤0,6 | 12−14 | ≤0,03 | ≤0,025 | --- | base |
Quality
Steel 40X13 is heat-resistant, corrosion-resistant. Foil, tape and sheet of this grade are resistant to soil and atmospheric moisture, mildly aggressive environments, plastic, have a significant tensile strength. Tape and sheet are not subject to deformation under load at t° up to 450 °C, but poorly welded.
Production
Thin sheet is produced as per GOST 5582−75, strip is produced as per GOST: 4405−75, 103−76, 18 968−73. Cold plastic deformation is limited. Temperature range of hot deformation is 1100 — 900 °C. Rapid heating and cooling can cause cracking of material. Therefore, preheating of the sheet to 850 °C and gradual cooling in the furnace is recommended. In the manufacture of medical instruments, step hardening with cooling in an alkali solution is recommended.
Mechanical properties of rolled material atto 20o C
| Range | GOST | σB | σT | Heat treatment |
|---|---|---|---|---|
| Sheet 1 — 4 mm | 5582−75 | 550 | 15 | Annealed at 740 — 800o C, |
| Bar, specified strength | 18 907−73 | 590−810 | 10 | Without heat treatment |
| Wire | 18 143−72 | 640−880 | 10−14 | — «-- |
σB — short-term strength limit;
σT — yield strength for permanent deformation;
d5 — elongation at break.Application
Foil, tape and sheet are used for the manufacture of measuring and medical instruments, springs, compressor parts, steam generators, working at temperatures up to 450 °C in slightly aggressive environments.
Supply
Supplied steel of 40X13 grade is certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities; the mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale production. We also offer optimum conditions for retail buyers. High level of service and prompt service is the face of our company.
Buy at the best price
Evek GmbH has an unlimited range of stainless alloys of the highest quality. We offer special alloys at an optimal price. If you are interested in our offer, please contact your nearest office. Qualified specialists will provide all necessary information regarding products, price range, sales conditions. The cost of goods depends on the parameters of products and additional terms of delivery.