Sleeve 2.0321 - CuZn37
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| L63 | 2.0321 | C27200 | CuZn37 | Delivery from the stock, in stock |
Supplier
We offer to buy brass bushing CuZn37, 2.0321 from specialized warehouses of supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy CuZn37, 2.0321 brass bushing, the price is optimal in this segment of rolled products.
Technical characteristics
Plain brass (low alloy). It can be well deformed in cold condition by deep drawing, drawing, rolling, coining and bending. Specific gravity 8.5 g/cm3.
Percentage composition
| Fe | Ni | Al | Cu | Pb | Sn | Zn | Impurities |
|---|---|---|---|---|---|---|---|
| ≤0.1 | ≤0.3 | ≤0.05 | 62-64 | ≤0.1 | ≤0.1 | Residue | ≤0.1 |
Mechanical properties (temperature 20°C)
Ultimate short-term strength (MPa)
| Rm -(R300) | Rm -(R350) | Rm -(R410) |
|---|---|---|
| 300-370 | 350-440 | 410-490 |
(yield strength for permanent deformation) MPa
| Rp0.2 -(R300) | Rp0.2 -(R520) | Rp0.2 -(R410) |
|---|---|---|
| 100 | 170 | 300 |
Tensile Elongation
| d5 --(R300) | d5 -(R350) | d5 -(R410) |
|---|---|---|
| 30% | 19% | 8% |
Heat treatment
Normalization, hardening, annealing, tempering
Cold working
Turning, milling, grinding, drilling.
Storage
Stored in covered warehouses or under a roof, which provides adequate protection against mechanical and other types of damage.
Buy, bargain price.
We offer brass bushing CuZn37, 2.0321, the price - determined by the technological features of production, without the inclusion of additional costs. On the website of the company displays information about the latest arrivals of products. It is possible to order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier. Timely delivery is ensured by representative offices in Eastern European cities.