Sheet, wire VT6 - grade 5 medical titanium
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
ВТ6 | ~3.7165 | R56200 | 6AL4V | Delivery from the stock, in stock |
Basic quality
Titanium Flat rolled products of high-quality titanium alloy VT6 and Wh, different heat resistance, non-magnetic, high specific strength and corrosion resistance ,. On the strength of these alloys are not inferior to steel but nearly half the weight of it. They have a melting point of 1668 ° C, poor thermal conductivity, thus easily forged and stamped. On the qualities of titanium is superior to most metals, primarily for corrosion resistance. It is often referred to as the eternal metal.
Advantages and production VT6 VT6S, VT6ch sheet, plate
Semifinished | Thickness (mm) | curing | Strength (MPa) | Plasticity of δ% | KCU J / cm ³ |
---|---|---|---|---|---|
VT6S Sheet | 2.0 — 4.0 | delivery condition | 824 — 980 | More than 12% | --- |
VT6S Sheet | 4.5 — 6.0 | Annealing | 834 — 980 | More than 12% | --- |
VT6S Sheet | 6.5 — 10.0 | Annealing | 834 — 980 | More than 10% | --- |
VT6S Sheet | 2 — 10 | Hardening-aging | More than 1030 | More than 8% | --- |
VT6S Sheet | 2mm | Tempering 920 ° C + 450 ° C for 2 hours | 1176 | 8.5% | --- |
VT6S Sheet | 7 mm | Hardening-aging 450 ° C for 2 hours | 1150 | 10.5% | --- |
Sheet D VT6S | 6 mm | Hot rolled billet | 936 | 10,7% | --- |
Sheet VT6S P | 6 mm | Hot rolled billet | 940 | 23.3% | --- |
Sheet VT6S 45 ° K NP | 6 mm | Hot rolled billet | 885 | 27,2% | --- |
Sheet D VT6S | 6 mm | Hardened workpiece | 940 | 15.1% | --- |
Sheet VT6S P | 6 mm | Hardened workpiece | 979 | 10% | --- |
Sheet VT6S 45 ° K NP | 6 mm | Hardened workpiece | 956 | 12.6% | --- |
Stove VT6S | 12 — 60 | Annealing | 834 — 980 | More than 7% | --- |
VT6 sheet | 0.3 -10.5 mm | Annealing | More than 882 | More than 8% | --- |
VT6 sheet | 2 — 10 | Annealing | 883 — 1080 | More than 8% | --- |
VT6 sheet | 1.6 — 3.2 D | --- | 921 — 960 | 14.1 — 19.6% | --- |
VT6 sheet | 1.6 — 3.2 P | --- | 926 — 959 | 13.6 — 19.4% | --- |
VT6 sheet | 3.2 D | Basic VSMPO technology | 960 | 19.6% | --- |
VT6 sheet | 2.5 D | Basic VSMPO technology | 944 | 14.4% | --- |
VT6 sheet | 1.6 D | Basic VSMPO technology | 921 | 15.9% | --- |
VT6 sheet | 3.2 P | Basic VSMPO technology | 959 | 19,4% | --- |
VT6 sheet | 2.5 P | Basic VSMPO technology | 945 | 13.6% | --- |
VT6 sheet | 1.6 P | Basic VSMPO technology | 926 | 15.2% | --- |
Stove VT6 | 11 — 60 | Annealing | 880 — 1080 | More than 6% | --- |
Stove VT6 | 60 — 150 | Annealing | 835 — 1030 | More than 6% | --- |
Stove VT6 | 50 ppm | Vacuum annealing 750 ° C | 935 | 10.9% | --- |
Stove VT6 | 50 MMP | Vacuum annealing 750 ° C | 946 | eleven% | --- |
Stove VT6 | 125 ppm | Vacuum annealing 750 ° C | 856 | 6.7% | --- |
Stove VT6 | 125 mlm | Vacuum annealing 750 ° C | 856 | 9.3% | --- |
Stove VT6 | 200 ppm | Vacuum annealing 750 ° C | 839 | 7.2% | --- |
Stove VT6 | 200 mlm | Vacuum annealing 750 ° C | 837 | 8.9% | --- |
Stove VT6ch | 50 mm | Annealing 730 ° for 2 hours | 890 | 13% | 70 |
Stove VT6ch | 50 mm | Annealing 590 ° for 2 hours | 900 | 13% | 92 |
Stove VT6ch | 50 mm | Beta annealing 1050 ° + 730 ° for 2 hours | 890 | 12% | 55 |
Stove VT6ch | 50 mm | Annealing 800 °, 2 hours + 500 ° | 870 | 14% | 107 |
Stove VT6ch | 50 mm | Recrystallized Zion joke | 820 | 29% | 80 |
D — a longitudinal direction of cutting samples; P — the cross; In — a high-rise, T — tangentsionalnoe.
Long-term strength of VT6 sheet
Semifinished | Heat treatment | t ° C | Long-term strength (MPa) 100 hours |
---|---|---|---|
Sheets 2.3 mm | Annealing | 350 ° | 630 |
Sheets 2.3 mm | Annealing | 450 ° | 520 |
Durability — the maximum voltage that destroys the material at a given temperature after a certain time.
Heat resistance VT6S sheet
Semifinished | curing | t ° C | creep strength (MPa) 0.2 / 100 |
---|---|---|---|
Sheet3 mm | --- | 350 | More than 320 |
Heat resistance is determined by the limit of creep — the value of voltage, which at a given temperature deforms the material by a predetermined amount. Zip through fraction — strain and time (in hours), through which this deformation occurs.
Fatigue resistance VT6 sheet VT6S
Sheet | Thickness (mm) | Heat treatment | R | loading scheme | endurance limit (MPa) 10,000,000 |
---|---|---|---|---|---|
VT6 | 2 — 3 | --- | — 1 | Symmetrical loading | 420 |
VT6S | 3 | --- | — 1 | --- | 400 |
disadvantages
The cost of titanium alloys is rather high and the complexity associated with extraction from the ore. Their production — energy-intensive and time-consuming, but thanks to a winning combination of useful properties, titanium has no analogues. Despite its high costs, its alloys are widely demanded, since only durable.
Using
High specific strength and corrosion resistance VT6 give an advantage in the aviation industry in the manufacture of airframe, skin, chassis, power set, details of attachment, wing mechanisms, pylons, hydraulic cylinders, in the manufacture of turbofan engines, rocket (sheathing, fastening details). In shipbuilding through resistance in seawater of VT6 produce propellers, heat exchangers and others. Fuses. Do not do without it modern chemistry and transport machinery. Due to the biological inertness, alloy demand in the food industry and in medicine, prostheses and implants it is not rejected out of tissues. Because titanium alloy Wh produce pressed parts for a long time working at t ° to + 450 ° C; they are used in constructions for supersonic aircraft manufacture beams, brackets and similar power components
Supply
We sell Lena, sheet and foil of titanium alloy VT6 and Wh at the best prices. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk, any semi-finished products for large-scale productions. We also offer optimal conditions for retail customers. High level of service and efficiency of service are the face of our company.
Buy at a bargain price
In stock company «Electrovek-steel» is represented by a diverse range of titanium alloys. We supply certified products of domestic and foreign manufacturers. Our staff members are always happy to provide expert assistance in the selection of metal-roll. We employ some of the most experienced management consultants. Strict compliance with the rules of production, excellent product quality and minimal lead times are the face of our company. For regular customers introduced discount prices.