Sheet, bar, circle VT16
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| BT16 | Delivery from the stock, in stock |
Evek GmbH always has a wide range of long products of VT16 titanium at a favorable price. Technical documentation includes data on chemical composition, limiting percentage of impurities; mechanical properties of products. From us you can buy in bulk standard and non-standard semi-finished products for large-scale production. We also offer optimum conditions for retail buyers. High level of service and prompt service is the face of our company.
Technical qualities of bar stock VT16
| Semifinished product | Thickness (mm) | Heat treatment | Strength (MPa) | Plasticity δ% | KCU J/cm³ |
|---|---|---|---|---|---|
| VT16 rod | 6 | Hardening + aging | 1050 (630) | --- | --- |
| -- "-- | 5 - 10 | Annealing | 875 | 18% | 95 |
| -- "-- | 10 | Hardening + aging | 1080 | 14,7 | --- |
| -- "-- | 10 | Hardening + aging | 1080 - 1470 | 16% | 80 |
| -- "-- | 12 | Hardening + aging | 1098 | 13,5% | --- |
| -- "-- | 12 | 780° annealing 1-2 h, RP to 400° air | 764 - 882 | 15 - 22% | 69 - 118 |
| -- "-- | 8 - 20 | Annealing | 814-952 (630) | Over 14% | Over 50 |
| -- "-- | 8 - 20 | Hardening + aging | 1050 - 1180 | Over 12% | Over 30 |
| -- "-- | 20 | Tempering 810° +550° 8 h, | 1140 | 18% | |
| -- "-- | 20 - 30 | Hardening + aging | 1050 - 1180 | Over 12% | Over 30 |
| -- "-- | 30 - 40 | Hardening + aging | 1050 - 1180 | More than 10% | Over 30 |
| -- "-- | 40 | Forged | 1117 | 12% | --- |
| -- "-- | Annealing | 785 - 980 | More than 8% | Over 50 | |
| -- "-- | Hardening + aging | 1085 - 1230 | 5% | --- | |
| -- "-- | Annealing 780° OP 3 °C / min | 800 - 920 | 16 - 22% | --- | |
| -- "-- | Delivery condition | 813 - 931 | 14% | --- | |
| VT16 wire | Degree of deformation 40% | 1240 | 3 | --- | --- |
| VT16 wire | Degree of deformation 60% | 1300 | 3 | --- | --- |
| VT16 wire | Degree of deformation 80% | 1350 | 3 | --- | --- |
OP - cooling with furnace. The shear strength in parentheses is MPa
Heat resistance is defined by the creep limit - the amount of stress that deforms the material by a given amount at a given temperature. The index through the fraction is the deformation and the time (in hours) in which this deformation occurs. Naturally, the higher the temperature, the lower the creep limit.
Heat Resistance of VT16 bar
| Semifinished product | Heat treatment | t°C | Creep strength (MPa) 0.2/100 |
|---|---|---|---|
| 6 -20 mm bars | Hardening + aging | 300° | 700 |
| Bars 6 -20 mm | Hardening + aging | 350° | 600 |
| Bars 6 -20 mm | Hardening + aging | 400° | 270 |
Longitudinal strength is the greatest stress that fractures the material at a given temperature, after a specified time.
The long-term strength of VT16 bars
| Semifinished product | Heat treatment | t°C | Long tensile strength (MPa) |
|---|---|---|---|
| VT16 bar 6 -20 mm | Hardening+aging | 300° | 900 |
| VT16 bar 6 -20 mm | Hardening+aging | 350° | 800 |
| VT16 bar 6 -20 mm | Hardening+aging | 400° | 670 |
Low cycle fatigue life of BT16 bar (repeated static loading)
| Semifinished product | Alloy | Heat treatment | Strength (MPa) | N x 1000 |
|---|---|---|---|---|
| Sections | VT16 | Hardening + aging | 1050 | 18 - 66 |
Fatigue resistance of VT16 bars
| Bar | Thickness (mm) | Heat treatment | R | loading scheme | Endurance limit (MPa) 10.000.000 |
|---|---|---|---|---|---|
| VT16 | 25 | Hardening + aging | - 1 | Symmetrical loading | Over 529 |
| VT16 | 25 | Tempering 810° + 500° 12 h. | - 1 | Cantilever bending in one plane | 535 |
| VT16 | 20 | Tempering 810° + 560° 8 h. | - 1 | Symmetrical loading | Over 314 |
| VT16 | 20 | Annealing | - 1 | Symmetrical loading | Over 431 |
| VT16 | 6 - 20 | Hardening + aging | - 1 | Bending with rotation | 500 |
| VT16 | 10 | Hardening + aging | - 1 | Bending with rotation | 540 |
| VT16 | 5 - 10 | Annealing | - 1 | Bending with rotation | 440 |
Applications
Semifinished products of titanium alloy VT16 are widely used for the production of fasteners and threaded parts with a diameter up to 40 mm, for long-term operation at temperatures up to 300 ° C, (and at temperatures up to 130 ° C - without limiting the resource).
Buy at a bargain price
Evek GmbH always has a wide range of high-quality titanium rolled products in stock. We sell wholesale and retail wire, rounds, bars of titanium alloy VT16 at optimal prices. All products are certified. The quality is guaranteed by the strict observance of the standards and production technology. The technical documentation includes data on the chemical composition of the products, the limiting percentage of impurities and mechanical properties. Consultations of experienced managers will help you to make your choice. Orders placed on very short notice. Wholesalers receive preferential discounts.