Sheet, wire VT1-0 - titanium grade 2
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| VT1-0 | 3.7035 | R50400 | Delivery from the stock, in stock |
General characteristics
Titanium alloy VT1-0 contains 99.5% of chemically pure titanium. Sheet, strip and foil made of it are characterized by corrosion and chemical resistance, heat resistance, insignificant thermal expansion coefficient, low density (4.505 g/cm3), high ductility. They are biologically inert, resistant to prolonged exposure to moisture, chlorinated or sea water, and can withstand enormous pressure.
| Semifinished product | Thickness (mm) | Heat treatment | Strength (MPa) | Plasticity δ% | KCU J/cm³ |
|---|---|---|---|---|---|
| Sheet | 0,3 - 0,5 | Annealed | Over 400 | .>20 - 30 | --- |
| - "- | 0,3 - 0,4 | Delivery condition | 392 - 540 | Over 25% | --- |
| - "- | 0,5 - 1,8 | Delivery condition | 392 - 540 | Over 30% | --- |
| - "- | 2,0 - 6,0 | Delivery condition | 392 - 540 | Over 25% | --- |
| - "- | 6,5 - 10,0 | Delivery condition | 392 - 540 | Over 20% | --- |
| - "- | 16 | Hot rolling | 467 | 31,2 | --- |
| - "- | 20 | Hot rolling | 461 | 30,0 | --- |
| - "- | 25 | Hot rolling | 480 | 30,0 | --- |
| - "- | 2 | Annealing | 338 | 51,0 | --- |
| - "- | 0,3 - 0,5 | Annealing | 343 - 490 | Over 45 | --- |
| - "- | 0,55 - 1,5 | Annealing | 343 - 490 | Over 35 | --- |
| - "- | 0,05 - 0,08 | Annealing | over 400 | --- | --- |
| Foil, fine grain | 0,08 | Annealing | 540 - 600 | 18 - 26 | --- |
| Foil, coarse grain | 0,08 | Annealing | 640 - 700 | 8 - 10 | --- |
| Foil | 0.05 - 0.03x90 mm | Vacuum annealing | 510 | 31,2 | --- |
The annealing temperature for sheet and strip is 520 - 570 °C. The incomplete annealing temperature is 475 - 485 °C.
Disadvantages
Labor and energy intensive production of pure titanium affects its cost. In addition, the high plasticity is possible only by reducing the strength properties - semi-finished products from BT1-0 are not as strong as from other titanium alloys.
Use
Advantages of ribbons, sheets, foils from VT1-0 make them an ideal material for application in petrochemical industry, construction, power engineering, shipbuilding, rocket and aircraft industry. Stamped parts are produced from sheet and strip, allowing not only to reduce the overall weight of structures, but also to gain significant benefits through increased reliability and durability. Biological inertness allows the production of surgical instruments (scalpels, tweezers), joint prostheses, plates for plastic skull and pelvis bones, dental crowns and bridges, from foil - ophthalmic implants, as well as such equipment as centrifuges, separators, containers and much more.
Buy at the best price
Evek GmbH has a wide range of titanium rolled products in stock. We sell BT1-0 sheet, strip, foil at the best prices. Quality is guaranteed by strict compliance with standards and production technology. The products pass ultrasonic inspection for defects. Experienced managers give comprehensive advice on all questions. Delivery - in the shortest possible time. In case of bulk orders there is a flexible discount system.