VK3 plate, hard alloy
Supplier Evek GmbH offers to buy plate ВК3 at the best price on the company's website. The price of the plate ВК3 is due to its qualities and technical characteristics. Hard alloys, to which this product belongs, are durable and wear-resistant, retaining these qualities at temperatures from 900 to 1150 °C. BK3 inserts are made from refractory, high-hardness materials in which tungsten carbide is used as the basis.
Chemical composition and marking
According to GOST, carbide inserts by chemical composition can be:
- tungsten-cobalt with the marking BK;
- titanium-tungsten-cobalt with the TK designation;
- titanium-tungsten-tungsten-cobalt with marking TTK.
If necessary to buy a plate ВК3 require attention to the marking, in which the letters indicate the content of tungsten in combination with cobalt, and numbers indicate the percentage inclusion of cobalt in the alloy.
| WC | Co |
|---|---|
| base | 3 |
Application
The supplier of WC3 inserts explains that these products are part of cutting tools used for precision machining by removing material. Chip formation is observed during the machining process. To buy inserts ВК 3 is required for use in the process of drilling and milling, turning and countersinking, for reaming and other operations. Price inserts ВК3 largely due to the guaranteed accuracy of processing.
Production
Pressed powders with tungsten carbide as a base are used in the production process. The powders are sintered under the influence of high temperature, after which they are machined. The result is solid plates with high wear resistance and high heat resistance,
Scope of application
The plates can be used for works involving non-ferrous metals, gray cast iron, alloys, non-metallic materials such as glass, plastic, fiberglass and fiberglass plastic. ВК3 can be used as a tool for cutting sheet glass. Check the price of WC3 plate on the site from the manager of the company, as the cost may vary in accordance with the accompanying conditions of purchase.