Tube, sheet, wire VT3-1
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| VT3-1 | Delivery from the stock, in stock |
Technical characteristics
This grade is α+β titanium which is further used for forged and stamped parts operating at temperatures up to 400 °C (6000 hours) and up to 450 °C (2000 hours). Specific gravity 4.5 g/cm3]. Brinell hardness HB 10-1 up to 410 MPa after hardening. Weldability: Limited.
Percentage composition (GOST 19 807- 91)
| Ti | Fe | C | Si | Cr | Mo | N | Al | Zr | O | H | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 85.95 - 91.05 | 0.2 - 0.7 | ≤0.1 | 0.15 - 0.4 | 0.8 - 2 | 2 - 3 | ≤0.05 | 5.5 - 7 | ≤0.5 | ≤0.15 | ≤0.015 | ≤0.3 |
| Range | GOST | s in | d5 | y | KCU | Heat treatment |
|---|---|---|---|---|---|---|
| - | MPa | % | % | kJ/m2 | - | |
| Round, | 26492-85 | 930 | 6-8 | 15-20 | 250-300 | Annealing |
| Bar, upgraded quality | 26492-85 | 930-1230 | 8-10 | 20-30 | 300 | Annealing |
| Bar, upgraded quality | 26492-85 | 1180 | 6 | 16-20 | 180-200 | Hardening and aging |
Physical material properties
| t° | E 10- 5 | a 10 6 | l | C | R 10 9 |
|---|---|---|---|---|---|
| Degree | MPa | 1/Gradus | W/(m -degree) | J/(kg-grad) | Ohm-m |
| 20 | 1.15 | 8.01 | 1360 | ||
| 200 | 9.8 | 10.04 | 0.502 | ||
| 400 | 10.9 | 12.92 | 0.628 | ||
| 600 | 11.6 | 15.49 | 0.712 |
Sv - Ultimate short-term strength
sT - Limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break
HB - Brinell hardness
E - Modulus of elasticity of the first kind
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering.
Furnizor
We offer to buy tubes, sheets, wires VT3-1 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with GOST. Supplier Evek GmbH offers to buy tubes, sheets, wires VT3-1, the price - the best in this segment of rolled products.
Buy, bargain price
We offer tube, sheet, wire VT3-1, price - is determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of titanium alloys company Evek GmbH is a profitable supplier.