Tu 48-21-145-72. Monel alloy bars and forgings. Technical conditions.
Technical characteristics
According to TU 48-21-145-72 the diameter of rolled bars, forgings and their limit deviations should meet the requirements specified below.
| Diameter of bars and forgings, mm | Method of manufacturing | Permissible deviations, mm |
|---|---|---|
| 75 | rolled | -3,0 |
| 80 | -3,0 | |
| 85 | -3,0 | |
| 90 | -3,0 | |
| 100 | Forged | ±8,0 |
| 110 | ±8,0 | |
| 125 | ±8,0 | |
| 140 | ±8,0 |
The bars and forgings can be subjected to tests. Material must meet the required mechanical properties - tensile strength, yield strength, and relative elongation.
Supply
Surface quality shall be clean with no film, shells or cracks. Runny color local surface defects (foams, sinks, cracks, bubbles, dents) are allowed, not withdrawing at control cleaning rod diameter over the limit deviations. The wire shall be evenly cut. The wire shall have no extraneous inclusions, splits and voids on the break.
The supplier
Evek GmbH offers to buy Monel bars or forgings at best prices in the bar segment. We offer Monel bars or forgings from Evek GmbH specialized warehouses with delivery in any city. Full compliance with TU 48-21-145-72
Buy, bargain price
Supplier offers to buy a bar or forgings from monel alloy, price - due to technological features of production without including additional costs. The website of Evek GmbH contains information about the latest arrivals of products. The price is optimal from the supplier.
