Are you interested in bronze turning? The supplier Evek GmbH offers a wide range of bronze at an affordable price. We provide delivery of products anywhere in the continent. The price is optimal.

Preparation for turning

A number of bronze alloys are characterized by low mechanical strength, and therefore are poorly amenable to turning. Such alloys include all grades of tin bronze. To increase the strength of the workpieces, they are subjected to homogenization annealing before turning. Turning of siliceous bronzes poses problems only in those cases when high-silicon bronzes with Si content over 5.6% are to be machined. Such bronzes should also be annealed before turning. On the contrary, beryllium bronzes harden under any kind of machining, therefore, turning of such workpieces should be started at lower speeds and cutting tool feeds, and then the intensity of turning should be increased.

Fine turning

For fine turning or boring of bronze workpieces mainly diamond cutters are used. The feed rate is set at the maximum possible values for the machine - up to 100 m/minute. Under these conditions the final product has the lowest surface roughness with increased machining accuracy. Fine turning with diamond cutters eliminates the need for finish grinding, to which parts of other metals and alloys are often subjected after turning. This is also necessary because machine grinding of bronze is very labor-intensive. The company Evek GmbH offers to buy bronze products. The price from the manufacturer. The supplier provides prompt delivery of products to any address.

Buy. Supplier, price.

Are you interested in bronze turning? Supplier Evek GmbH offers to buy bronze at a price from the manufacturer. We provide delivery of products anywhere in the continent. The price is optimal. We invite you to partner cooperation.