Stamping steel in the Din system
Are you interested in DIN standards for stamping steel? The supplier Evek GmbH offers to buy stamping steel in any quantity at an affordable price in a wide range. We provide product delivery anywhere in the continent. The price is optimal.
General Terms
The stamping steels are melted to the specifications of DIN EN 17350 to meet the requirements of Western European manufacturers. This standard defines the correspondence between the steels as follows:
Forging steel.
EN ISO 4957 Alpha numerical symbol |
EN ISO 4957 Grade designation |
DIN 17350 |
| C45U | 1,1730 | C45W |
| C70U | 1,1620 | C70W2 |
| C80U | 1,1525 | C80W1 |
| C90U | 1,1535 | - |
| C105U | 1,1545 | C105W1 |
| C120U | 1,1555 | - |
Tool steels for cold forming dies
EN ISO 4957 Alpha numeral symbol |
EN ISO 4957 Grade designation |
DIN 17350 |
| 90MnCrV8 | 1,2842 | 90MnCrV8 |
| X153CrMoV12 | 1,2379 | X155CrVMo12-1 |
| X210Cr12 | 1,2080 | X210Cr12 |
| X210CrW12 | 1,2436 | X210CrW12 |
Tool steels for hot stamping tools
EN ISO 4957 Alphanumeric symbol |
EN ISO 4957 Grade designation |
DIN 17350 |
| 55NiCrMoV7 | 1,2713 | 55NiCrMoV7 |
| 32CrMoV12-28 | 1,2365 | X32CrMoV3-3 |
| X37CrMoV5-1 | 1,2343 | X38CrMoV5-1 |
| X40CrMoV5-1 | 1,2344 | X38CrMoV5-1 |
High-speed steel alloys
EN ISO 4957 Alphanumeric symbol |
EN ISO 4957 Grade designation |
DIN 17350 |
| HS18-0-1 | 1,3355 | S18-0-1 |
| HS2-9-2 | 1,3348 | S2-9-2 |
| HS3-3-2 | 1,3333 | - |
| HS6-5-2C | 1,3343 | S6-5-2 |
| HS6-5-3 | 1,3344 | S6-5-3 |
Evek GmbH offers to buy stamping steel according to the technical standard EN 17350 at an affordable price in a wide range. We provide delivery of products to any point on the continent. The price is optimal.
Principles for selecting die steels
The European Federal Standard defines a division of die steels into two groups - alloyed and unalloyed. The criterion of alloyability is the critical value of the cooling rate of the alloy during its hardening. All stamped steel alloys included in the European Federal Standard are characterized by cross-sectional through hardenability and low cooling rates, which are achieved not only during quenching in water, but even in oil or air. This results in improved dimensional stability and minimization of thermal stresses. Hence, there is no warping of tools made of these steels.
Alloying
The alloying components in the die steels covered by the European Federal Standard are tungsten, chromium, vanadium and molybdenum. Accordingly, this Federal Standard applies to the following groups of die steels:
- Chromium-vanadium-tungsten;
- Chromium;
- Tungsten-chromium-vanadium;
- Chrome-silicon;
- Chromium-manganese steels;
- Nickel-chromium.
Buy. Supplier, price.
Are you interested in the European Federal Stamping Steel Standards? Supplier Evek GmbH offers to buy stamping steel in any quantity at manufacturer's price. We provide delivery of products anywhere in the continent. The price is optimal. We invite you to partner cooperation.
