Alloy tool steel in the Din system

Are you interested in DIN standards for alloy tool steels? The supplier Evek GmbH offers to buy any quantity of alloy tool steel at an affordable price in a wide range. We provide delivery of products to any point on the continent. The price is optimal.

General provisions

The correspondence of norms of domestic standards and DIN 17350 standard for tool alloy steels is shown in the table:

Steel grades Mass fraction of elements, %
GOST
5950-2000		 DIN AISI/SAE С Si Mn Cr W V Mo Ni
8CRF 80CrV2
(1.2235)		 0,70-0,80 0,10-0,40 0,15-0,45 0,40-0,70 <0,20 0,15-0,30 <0,20 <0,35
Х 100Cr6
(1.2067)		 L3 0,95-1,10 0,10-0,40 0,15-0,45 1,30-1,65 <0,20 <0,15 <0,20 <0,35
9CRWG 100MnCrW4
(1.2510)		 1 0,85-0,95 0,10-0,40 0,90-1,20 0,50-0,80 0,50-0,80 <0,15 <0,30 <0,35
Х12 X210Cr12
(1.2080)		 D3 2,00-2,20 0,10-0,40 0,15-0,45 11,5-13,0 <0,20 <0,15 <0,20 <0,35
X12MF X155CrMo12.1
(1.2379)		 D2 1,45-1,65 0,10-0,40 0,15-0,45 11,0-12,5 <0,20 0,15-0,30 0,40-0,60 <0,35
X12F1 1,25-1,45 0,10-0,40 0,15-0,45 11,0-12,5 <0,20 0,70-0,90 <0,20 <0,35
7Х3 0,65-0,75 0,10-0,40 0,15-0,45 3,20-3,80 <0,20 <0,15 <0,20 <0,35
5CRNIMOV6 55NiCrMoV6
(1.2713)		 L6 0,50-0,60 0,10-0,40 0,50-0,80 0,50-0,80 <0,20 <0,15 0,15-0,30 1,40-1,80
9HS 0,85-0,95 1,20-1,60 0,30-0,60 0,95-1,25 <0,20 <0,15 <0,20 <0,35
4X5MFS X38CrMoV5.1
(1.2343)		 H11 0,32-0,40 0,90-1,20 0,20-0,50 4,50-5,50 <0,20 0,30-0,50 1,20-1,50 <0,35
3CR3M3F X32CrMoV3.3
(1.2365)		 Н10 0,27-0,34 0,10-0,40 0,20-0,50 2,80-3,50 <0,20 0,40-0,60 2,50-3,00 <0,35
4Х5В2FS
(EI958)		 0,35-0,45 0,80-1,20 0,15-0,45 4,50-5,50 1,60-2,20 0,60-0,90 <0,30 <0,35
6CHEV2C 0,55-0,65 0,50-0,80 0,15-0,45 1,00-1,30 2,20-2,70 <0,15 <0,30 <0,35
7ХГ2ВМФ (А6) 0,68-0,76 0,10-0,40 1,80-2,30 1,50-1,80 0,55-0,90 0,10-0,25 0,50-0,80 <0,35
9G2F 90MnCrV8
(1.2842)		 2 0,85-0,95 0,10-0,40 1,70-2,20 <0,20 0,10-0,30 <0,20 <0,35
X100CrMoV5.1
(1.2363)		 A2 0,90-1,05 0,20-0,40 0,40-0,70 4,80-5,50 0,10-0,30 0,90-1,20
GOST
19265-73
R6M5 S6-5-2
(1.3343)		 М2 0,82-0,90 0,20-0,50 0,20-0,50 3,80-4,40 5,50-6,50 1,70-2,10 4,80-5,30 Co?0.5
Ni?0.6
Р18 S18-0-1
(1.3355)		 0,73-0,83 0,20-0,50 0,20-0,50 3,80-4,40 17,0-18,5 1,00-1,40 <1,0 Co?0.5
Ni?0.6
Р6М5К5 S6-5-2-5
(1.3243)		 0,86-0,94 0,20-0,50 0,20-0,50 3,80-4,30 5,70-6,70 1,70-2,10 4,80-5,30 Co 0.5-6.0
R6M5K5 SC6-5-2
(1.3342)		 M3 class1 1,00-1,25 0,20-0,40 0,20-0,40 3,75-4,50 5,50-6,75 2,25-3,25 4,75-6,25
R6M5K5 S6-5-3
(1.3344)		 M3 class2 1,00-1,25 0,20-0,40 0,20-0,40 3,75-4,50 5,50-6,75 2,25-3,25 4,75-6,25

Evek GmbH offers to buy a wide range of alloy structural steel at an affordable price. We provide delivery of products to any point on the continent. The price is optimum.

Applicability of imported tool steels

GOST 5950-00 DIN 17350 ASTM A-681
9ХВГ 100MnCrW4 (1.2510) 01

Application: threaded gauges, complex shape templates, complex precision cold forming dies which must not undergo significant volume changes and warping during hardening; tools for cold working of materials.
Types of supplied products: rolled products of square, rectangular (strip) and circular cross-section, honed, ground bars, rolled steel with special surface finish, Delivery condition: with annealing.

X12MF

GOST 5950-00 DIN 17350 ASTM A-681
X12MF X155CrVMo 12.1 (1.2379) D2

Applications: metal saws, impact edging tools, bending dies, cold shears, thread rolling tools, extrusion stamping tools and others if impact toughness is required.
Types of products: round bars 8-70 mm, ground and polished bars 12-70 mm in diameter, steel with special surface finish, forged bars and billets: round 80-120 mm, square 80-200 mm up to 2 m long
Delivery condition: with annealing.

4Х5МФС.

GOST 5950-00 DIN ASTM A-681
4Х5МФС X38CrMoV 5.1 (1.2343) H11

Application: dies and replaceable die inserts, forging machine tools, light metal die casting molds, heavy-duty tools: press nuts, dies, punches.
Range of products: bars, diameter 10-160 mm, ground or polished bars with special surface finish with tolerance range h10-h12 (cr.1,5-70 mm); forged round, rectangular and square bars up to 2,0 m long. Delivery condition: with annealing

6ХВ2С, GOST 5950-00

General characteristics: chrome-tungsten-silicon tool steel for impact tools of high toughness, high hardenability (up to 70-80 mm) and hardenability. Sensitive to flocculation, prone to temper embrittlement, not used for welded constructions. Specific heat capacity at 20-100°C is 462 J/(kg°C).
Application: knives for cold metal cutting, thread rolling dies, punches and crimping dies for cold work, dies of complex shape, working with high shock loads; woodworking tools.
Types of products: round, square and rectangular bars, calibrated bars, forgings and forged blanks.
Delivery condition: annealed (high-tempered).

R6M5

GOST 19265-73 DIN 17350 ASTM A-600
Р6М5 S 6-5-2 (1.3343) M2

Applications: piercing punches, spiral drills, cutters, reamers, taps, planing tools, circular saws, deforming tools, cutting tools for precision work, reference punches for dies.
Types of supplied products: bars from 8 to 75 mm in diameter, rolled strip with thickness of 20-40 mm and width of 40-100 mm; forged round and square bars from 80 to 180 mm, length not more than 2 m. Steel calibrated with a special surface finish from 2 to 11 mm. Delivery condition: with annealing.

To buy. Supplier, price

Are you interested in DIN standards for alloy tool steel? The supplier Evek GmbH offers to buy alloy tool steel in any quantity at the manufacturer's price. We guarantee delivery of products anywhere in the continent. The price is optimal. We invite to partner cooperation.