Fehrals have an electrical resistance of 1.2 - 1.30 ^μOhm-m2/m and a melting point of 1450-1500°C. The density of the alloy is 7.1 - 7.2 ^g/cm3, which makes it 17 - 18% lighter than nichrome. Alloy varieties have their own markings, depending on the proportion of the main components.

X15Yu5 (15% Cr, 5% Al), density 7.1 g/cm3, working t° 750-950°C. It is used for production of industrial electric heaters, powerful resistors and resistance elements. International names for X15Yu5: Aluchrom 0, Kanthal A1, Resistohm 145, Aluchrom 875, Eurofahl. Manufacturers can use their own markings, but they always indicate the name according to the world standards. You can see the following letters in the designation of brands: TEN - for tubular electric heaters; H - alloy for heating elements; C - material for resistance nodes.

X27Yu5T (27% Cr, 5% Al, up to 1% Ti) operating t ° 1300-1350 ° C. Serves for the production of heaters for industrial electric furnaces.

X23Yu5T (23% Cr, 5% Al, up to 1% Ti) operating t ° 750-950 ° C melting point of about 1450 ° C. It is used for the production of heaters for industrial electric furnaces. The disadvantages are the general property of FeChrals - brittleness and low plasticity.

GS23-5 (X23Yu5T-N-Vi) is an optimized version of X23Yu5T alloy. Additional alloying agents significantly improve its plasticity, which greatly facilitates the winding of spirals. Working t ° 1300-1350 ° C.

GS T (X23YU5-N-Vi) is used in electric heaters of industrial furnaces and other electrical devices of thermal action including household. Serves for the production of tubular electric heaters (TEN).

Megapir-150 - serves for the manufacture of resistive elements in electric furnaces and various electrical devices of thermal action.

Megapir-200 - is used for the manufacture of resistive elements, high-temperature electric heaters for industrial furnaces and various electrical devices of thermal action.

To buy. Price

Evek GmbH sells a wide range of rolled metal products at the best price. It is formed taking into account the LME (London metal exchange) rates and depends on the technological characteristics of production without any additional costs. The company always has fahl wire and ribbon in stock, which provides: 1) high efficiency of delivery within Ukraine and CIS countries; 2) cost savings for consumers on the maintenance of warehouse facilities; 3)wide range of products. Quality is guaranteed by strict compliance with technological norms of production. The terms of fulfilment of orders are minimal. The price depends on the order volume and additional delivery terms. With wholesale orders there is a system of discounts.