Wire, circle, rod 2.0872 - CuNi10Fe1Mn - Cw352h
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 2.0872 | C70600 | CuNi10Fe1Mn | Delivery from the stock, in stock |
Supplier
We offer to buy CuNi10Fe1Mn, Cw352h wire, rounds, bars from the specialized warehouse of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy wire, rounds, bars Cw352h, the price - the best in this segment of rolled products.
Analogues
| Germany | EU |
|---|---|
| DIN, WNr | EN |
| 2.0872 | CuNi10Fe1Mn |
| CuNi10Fe1Mn |
Technical characteristic
Alloy contains up to 11.5% Al, and 9 - 11% nickel, besides it is alloyed with iron, manganese, zinc, cobalt. The peculiarity of this alloy is high corrosion resistance and improved mechanical properties. Specific weight 8.9 g/cm3.
Percentages composition EN 12420-1999 (Cu 77 - 80%)
| Cu | C | Fe | Mn | Ni | Al | Co | Sn | Si | Pb | Pb | S | P | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| base | ≤0,05 | 1-2 | 0.5 - 1 | 9 - 11 | 10,5 - 11,5 | ≤0.1 | ≤0,03 | ≤0,1 | ≤0.02 | ≤0,05 | ≤0,05 | ≤0,02 | ≤0,2 |
Mechanical properties (temperature 20 °С)
| Range | s in | sT | d5 | Hardness HB 10 -1 |
|---|---|---|---|---|
| - | MPa | MPa | % | MPa |
| Bar products | 300-320 | 100-120 | 20 | 70-1205 |
sT - ultimate strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
Applications
Electrical engineering, transport engineering, musical instruments, design products.
Cold working
Turning, milling, grinding, drilling.
Heat Treatment
Normalization, hardening, annealing, tempering
Storage
Stored in covered warehouses or under a roof, which provides adequate protection against mechanical and other types of damage.
Buy a bargain price.
We offer wire, rounds, bars Cw352h, price - determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of non-ferrous alloys, Evek GmbH is a profitable supplier.