Wire, circle, rod 2.0975 - CuAI10Fe5Ni5 - c95500
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 2.0975 | C95800 | CuAl10Ni5Fe5-C | Delivery from the stock, in stock |
Technical characteristics
This bronze alloy contains up to 11.5% Al, 3-5.5% nickel and is also alloyed with iron and manganese. The peculiarity of this alloy is increased specific strength and improved mechanical properties. The specific gravity is 7.53 g/cm3. The melting point is 1038-1054 °C. Coefficient of thermal expansion 15.5*10-6 1/degree (20°-300°C)
Percentage composition ASTM B505/B505M-14 (Cu 78% - 81%)
| Cu | Fe | Mn | Ni | Al | Impurities |
|---|---|---|---|---|---|
| base | 3 - 5 | 3,4-3,6 | 3 - 5.5 | 10 - 11,5 | ≤0.6 |
Mechanical properties (temperature 20°C)
| Range | s in | sT | d5 | Hardness HB 10 -1 |
|---|---|---|---|---|
| - | MPa | MPa | % | MPa |
| Bar products | 655 | 290 | 10 | 150 |
sB - Ultimate short term tensile strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile strain at break.
HB - Brinell hardness
Applications
Electrical equipment, musical instruments, window frames, machine and aircraft parts, bushings, saddles, piston guides, worm gears, valves, landing gear parts, marine coatings, sewage treatment,
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering
Storage
Stored in covered or roofed warehouses, adequately protected from mechanical and other types of damage.
The supplier
We offer to buy wire, rounds, bars 2.0975 - CuAI10Fe5Ni5 - c95500 from specialised warehouses of supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy wire, round, bar 2.0975 - CuAI10Fe5Ni5 - c95500, the price is optimal in this segment of rolled products.
Buy, bargain price.
We offer wire, round, bar 2.0975 - CuAI10Fe5Ni5 - c95500, price - determined by the technological features of production without including additional costs. It is possible to order products with non-standard parameters. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier.