Wire, circle, rod 2.0402 - CuZn40Pb2 - C38010
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| LS59-1 | 2.0402 | CuZn39Pb1 | Delivery from the stock, in stock |
Supplier
We offer to buy brass circle, rod, wire, tube of alloy 2.0402 - CuZn40Pb2 - C38010 from specialized warehouses of supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy brass circle, rod, wire, tube of alloy 2.0402 - C38010, the price - optimal in this segment of rolled products.
Technical characteristics
Brass is well deformed in the cold state. It contains 57-59% copper and 36.7-40.3% zinc. The alloy is alloyed with lead, iron, tin, nickel and aluminum. Brinell hardness is 90-120 MPa.
Percentage composition of C38010
| Fe | Ni | Al | Cu | Pb | Sn | Zn | Impurities |
|---|---|---|---|---|---|---|---|
| ≤0,3 | ≤0,3 | ≤0,05 | 57-59 | 1,6-2,5 | ≤0,3 | Residual | ≤0,2 |
Mechanical properties (temperature 20°C)
Ultimate short-term strength (MPa)
| Rm -(R380) | Rm -(R430) |
|---|---|
| 380 | 430 |
Ultimate proportional limit (yield strength for permanent deformation) MPa
| Rp0.2 -(R380) | Rp0.2 -(R430) |
|---|---|
| 160 | 250 |
Tensile elongation at break
| d5 --(R380) | d5 -(R430) |
|---|---|
| 18% | 10% |
Cold working
Turning, milling, grinding, drilling, deep drawing, drawing, rolling, bending.
Storage
Stored in covered or roofed warehouses where they are adequately protected against mechanical and other types of damage.
Analogues
| EU | Germany | GOST |
|---|---|---|
| EN | DIN, WNr | GOST |
| CuZn40Pb2 | 2.0402 | LS59-2 |
| CuZn40Pb2 |
Buy, bargain price.
We offer brass circle, rod, wire, pipe of any grade, the price - determined by the technological features of production without the inclusion of additional costs. On the site of the company displays information on the latest arrivals of products. Products of non-standard parameters may be ordered. We offer the best price-quality ratio for the entire range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier. Timely delivery is ensured by representative offices in Eastern European cities.