Wire, circle, rod 2.0240 - CuZn15 - C23000
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 2.0240 | C23000 | CuZn15 | Delivery from the stock, in stock |
Supplier
We offer to buy brass wire, round, bar 2.0240 - CuZn15 - C23000 from specialized warehouse of supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy brass wire, a circle, a bar 2.0240 - CuZn15 - C23000, the price - optimum in this segment of rolled products.
Technical characteristics
Brass simple (low-alloy). It can be well deformed in cold condition by deep drawing, drawing, rolling, coining and bending. Modulus of elasticity = 120 kN/mm². Electrical conductivity = 22 MS/m.
Percentage composition
| Fe | Ni | Al | Cu | Pb | Sn | Zn | Impurities |
|---|---|---|---|---|---|---|---|
| ≤ 0.05 | ≤0.3 | ≤0.02 | 84 - 86 | ≤0.05 | ≤0.1 | Residue | ≤0.1 |
Mechanical properties (temperature 20°C)
Ultimate short-term strength (MPa)
| Rm -(R260) | Rm -(R300) | Rm-(R350) |
|---|---|---|
| 260-310 | 300-370 | 350-420 |
Limit of proportionality (yield strength for permanent deformation) MPa
| Rp0.2 -(R260) | Rp0.2 -(R300) | Rp0.2 -(R350) |
|---|---|---|
| 170 | 150 | 250 |
Tensile elongation at break
| d5 --(R260) | d5 -(R300) | d5 -(R350) |
|---|---|---|
| 45% | 25% | 12% |
Minimum elongation
| Lo = 50mm (%) (R260) | Lo = 50mm (%) (R300) | Lo = 50mm (%) (R350) |
|---|---|---|
| 36% | 16% | 4% |
Heat treatment
Normalizing, hardening, annealing, tempering
Cold working
Turning, milling, grinding, drilling.
Storage
Stored in covered warehouses or under a roof, which provides adequate protection against mechanical and other types of damage.
Buy, bargain price.
We offer brass wire, rounds, bars 2.0240 - CuZn15 - C23000, price - determined by the technological features of production without the inclusion of additional costs. On the site of the company displays information on the latest arrivals of products. It is possible to order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier. Timely delivery is ensured by representative offices in Eastern European cities.