Nichrome tape, tire H15N60 - 2.4867 - nikrothal 60®
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
Х15Н60 | EHN60 | 2.4867 | N06004 | NiCr60-15 | Delivery from the stock, in stock |
Х15Н60-Н | EHN60 | ~2.4867 | ~N06004 | ~NiCr60-15 | Delivery from the stock, in stock |
Х15Н60Н | EHN60 | ~~2.4867 | ~~N06004 | ~~NiCr60-15 | Delivery from the stock, in stock |
Relevance
Nichrome — a unique alloy of nickel and chromium. Ni has the ability to dissolve other metals, while maintaining excellent flexibility, heat resistance, high corrosion resistance in aggressive liquid or gaseous media. Heat resistance enhances chrome. It is characterized by a hardness, corrosion resistance. Nichrome ribbon contains other elements: manganese, titanium, silicon, phosphorus, but the total proportion of less than 1%.
properties
Nichrome has high electrical resistance, the melting temperature of almost 1,500 ° C. The greater the proportion of the nickel, the more heat resistant Nichrome. H20N80 Nichrome used at t ° to 1200 ° C, and nichrome H15N60 — up to 1125 ° C. Resistance to corrosion tape, high electrical resistivity, the minimum coefficient of thermal expansion make it indispensable for high-temperature heating elements, working reliably in any, even the aggressive environment. Nichrome thanks to the remarkable plasticity, can be rolled to very thin foil. A small density — only 8.4 g / cm³ gives significant savings in weight. It is hardly a disadvantage that Nichrome has a high price, should be considered as reliability, durability, minimal need for maintenance.
making
According to the standards GOST Nichrome strip has a thickness of 0.1 millimeter. Her cold-rolled or electrolytic method is used. Nichrome tape comes in rolls of length ten, twenty or forty meters. If the thickness is more than 0.1 mm, the tape produced in thermal soft state.
application
Nichrome tape is widely used to convert electricity into heat, indispensable in resistance units, starting resistors are resistant to vibration, compact, relatively small weight. Another important area — blocks ballasts resistors cranes, which are included in the circuit of electric motors for a smooth start. They regulate the speed of electric motors Ramp both DC and AC. Tape Nichrome Cr20Ni80 (20% Cr + 80% Ni) is most often used modern industry:
· Thermocouple industrial kilns, elektrosushilok heating parts;
· In household electric heaters;
· In domestic or industrial water heaters.
Tape Nichrome brand H15N60 used in the production nepretsizionnyh (no special requirements for accuracy) resistor. This is due to the economic side, because the price of the brand below. In general, the nichrome element used for enhanced electrical reliability.
Deliveries
The price depends on fluctuations in the cost of nickel, chromium. Through our website, you have the opportunity to more fully acquainted with the products, learn about the characteristics and properties, methods of production and processing of the alloy of interest, order the necessary goods. On our site contains Nichrome products, in t. Ch. Nichrome wire, which is easy to buy through our managers.
Band
Nichrome strip has a high electrical resistance and minimal thermal coefficient of electrical resistance. These properties along with high heat resistance is determined its application for the production of high-temperature heating elements,
Nichrome band Cr20Ni80 brand used in the production of:
· Heating elements designed for continuous operation at t ° to 1250 ° C in the open air
· rheostats
· Band resistors.
Buy at a bargain price
The company «Electrovek-steel» sells nichrome at the best price. It is determined by the technological features of production without including additional costs. Evek.org on our website. you will find all the necessary information about the products can download the product catalog, see price list. We are waiting for your orders.