Alloy CA4M1 (CAM4-1)

  • ZnAl4A alloy
  • Alloy ZnAl4Cu1A
  • Alloy ZnAl4Cu3
  • Alloy ZnAl4Cu3A
  • Alloy TsA30M5 (TsAM30-5)
  • Alloy CA4
  • Alloy TsA4M1 (TsAM4-1)
  • Alloy TsA4M1v (TsAM4-1v)
  • Alloy TsA4M1o (TsAM4-1o)
  • Alloy TsA4M3 (TsAM4-3)
  • Alloy TsA4M3o (TsAM4-3o)
  • Alloy CA4o
  • Alloy TsA8M1 (TsAM8-1)

    • Designation

    Name The value
    Designation GOST Cyrillic ЦА4М1
    Designation GOST Latin TsA4M1
    Transliteration TsA4M1
    By chemical elements ZnAl4Cu1
    Name The value
    Designation GOST Cyrillic ЦАМ4-1
    Designation GOST Latin TsAM4-1
    Transliteration TsAM4-1
    By chemical elements ZnAlCu4-1

    Description

    Alloy CA4M1 used: for the production of molding critical parts of medium strength; casting parts for shipbuilding, ship engineering and instrumentation; hull, reinforcing, decorative parts of automobile, tractor, electrical and other industries.

    Note

    The alloy has good fluidity, good corrosion resistance, practically does not change size during natural aging (but dimensional stability is lower than that of alloy Ca4m1o).

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 19424-97, GOST 25140-93, OST 5-9208-81, OST 4.021.009-92, OST 4.021.012-92
    Castings, non-ferrous metals and alloys В84 OST 5Р.9209-82

    Chemical composition

    Standard Si Fe Cu Al Zn Sn Pb Mg Cd
    OST 5Р.9209-82 ≤0.1 ≤0.1 0.5-1.5 3.4-4.5 Rest ≤0.01 ≤0.02 0.03-0.1 ≤0.01
    GOST 19424-97 ≤0.015 ≤0.05 0.7-1.2 3.5-4.3 Rest ≤0.002 ≤0.01 0.03-0.06 ≤0.005
    GOST 25140-93 ≤0.015 ≤0.07 0.7-1.3 3.5-4.3 Rest ≤0.002 ≤0.01 0.02-0.06 ≤0.005
    Zn is the basis.
    According to OST 5P.9209-82, the total content of impurities is ≤ 0.15%. Impurities, which are not regulated, are included in the total amount of impurities.
    According to GOST 19424-97 in the alloy for the production of pigs, the mass fraction of the main components and specific impurities can be changed by agreement of the consumer with the manufacturer.
    According to GOST 25140-93, at the request of the consumer, the mass fraction of lead should be ≤ 0.006%.

    Mechanical properties

    Section, mm σU, MPa d5, % HB, MPa
    Castings according to GOST 25140-93
    ≥215 ≥1 ≥80
    ≥270 ≥1.7 ≥80

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature r, kg/m3 l, W/(m · °C) a, 10-6 1/°C С, J/(kg · °C)
    20 6700 109 - 440
    100 - - 265 -

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    l Coefficient of thermal conductivity
    R UD. the resistivity