Sheet, bar, circle OT-4-0
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| OT4 | Delivery from the stock, in stock | ||||
| OT4-0 | Delivery from the stock, in stock | ||||
| OT4-1 | Delivery from the stock, in stock |
Supplier
We offer to buy sheet, bar, circle OT4-0 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with GOST and international standards. Supplier Evek GmbH offers to buy sheet, bars, a circle OT4-0, the price - the best in this segment of rolled products.
Technical characteristics
OT alloys belong to pseudo α-alloys of medium heat resistance, but high ductility. The weldability is not restricted. Specific gravity 4.5 g/cm3]. Brinell hardness HB 10-1 157-206 MPa. Heat treatment with intermediate cooling rate between cooling in water and furnace gives the products a minimum level of creep.
Percentage composition (GOST 19 807-91)
| Ti | Fe | C | Si | Mn | N | Al | Zr | O | H | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| 96-99 | ≤0.3 | ≤0.1 | ≤0.15 | 0,2-1 | ≤0.05 | ≤1,4 | ≤0,8 | ≤0.15 | ≤0.0012 | ≤0.3 |
Mechanical properties (t° 20°C)
| Rolled product | σw(MPa) | sT (MPa) | δ5 (%) | ψ % | KCU (kJ/m2) |
|---|---|---|---|---|---|
| rod | 500-650 | 400 | 15 | 35 | 800 |
| Sheet Thin | 500-650 | 500 | 25 | 30 | 1000 |
Physical properties
| t° (degrees) | E 10 5 (MPa) | a 10 6 (1/Gradus) | R 10 9 (Ohm-m) |
|---|---|---|---|
| 20 | 1.15 |
σc - Ultimate short-term strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile strain at break
HB - Brinell hardness
E - Modulus of elasticity of the first kind
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering.
Buy, bargain price.
We offer sheet, bar, circle of titanium OT4-0, price - determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of titanium alloys company Evek GmbH is a profitable supplier.