Sheet, strip 4x5mfc, X37CrMoV5-1
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 4X5MFS | 1.2343 | H11 | X38CrMoV51 | Delivery from the stock, in stock |
Evek GmbH offers to buy at an affordable price rolled sheet (sheet, strip) made of 4X5MFS and X37CrMoV5-1 (1.2343) grades of tool alloy steels. Supplier ensures strict compliance with dimensions and thickness of the rolled product, guarantees timely delivery to the customer.
Chemical composition
4Х5МФС steel grade is produced in CIS countries according to
| Element | C | Si | Mn | Cr | Mo | V |
|---|---|---|---|---|---|---|
| Content in steel, % | 0,32...0,40 | 0,80...1,20 | 0,15...0,40 | 4,50...5,50 | 1,20...1,50 | 0,30...0,60 |
The content of metallurgical impurities in the finished product should not exceed 0,025%.
The foreign analogue of the steel in question is tool steel for hot-punch tooling production of X37CrMoV5-1 (1.2343), which is produced in Europe according to German DIN specifications.
The composition of the steel is somewhat different from that given above, as can be seen in the following table:
| Element | C | Si | Mn | Cr | Mo | V |
|---|---|---|---|---|---|---|
| Content in steel, % | 0,33...0,41 | 0,80...1,20 | 0,25...0,50 | 4,80...5,50 | 1,10...1,50 | 0,30...0,50 |
Company Evek GmbH offers to buy at advantageous price from the manufacturer sheets and strips made of tool alloy steels 4X5MFS and X37CrMoV5-1 (1.2343). Supplier provides strict compliance with the assortment and profile of sheet products, guaranteed by its timely delivery to the address specified by the consumer.
Properties and application
Steels of the reviewed grades have found wide application in manufacturing of stamping tools for high-speed pneumatic hammers and hydraulic screw presses. They are distinguished by the increased impact toughness characteristics, which allows using the rolled steels 4Х5МФС and X37CrMoV5-1 (1.2343) also for small dies of forging hammers, on which hot deformation of steels and alloys of the increased strength is made.
The performance of steels after quenching from 10100 C and subsequent tempering are in the following range of values:
- Hardness, HRC - 50...52;
- Heat resistance, 0 C - 580...600;
- Volumetric effect of martensitic transformation, % - 0,90 ... 0,92.
Buy a cost-effective producer price sheet metal, made of tool steel hot deformation grades 4X5MFS and X37CrMoV5-1 (1.2343) offers the supplier - the company Evek GmbH. Conformity of the assortment of ordered sections is guaranteed, timely delivery of products to the point set by the customer is ensured.