Sheet, strip 3х2v8f - X30WCrV9-3 - 1.2581

Sheet, strip

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
3Х2В8Ф 1.2581 X30WCrV9-3 Delivery from the stock, in stock

Buy sheet and strip, which are made from alloyed tool steel grades 3X2V8F and X30WCrV 9-3 (1.2581) offers the company Evek GmbH. Rolled steel is sold at economical producer price. Supplier guarantees the compliance with the required nomenclature of rolled products sizes, timely delivery of products to the customer's address is provided.

Chemical composition

Tool alloyed steel grade 3Х2В8Ф belongs to hot forming stamp steels. It is produced in the CIS countries according to the technical standards of GOST 5950. The composition of the steel includes:

Component С Si Mn Cr Ni V
Content in steel, % 0,30...0,40 0,15...0,40 0,15...0,40 2,20...2,70 7,50...8,50 0,20...0,60

GOST provides the upper content limit of non-metallic impurities - phosphorus and sulfur - at the level of 0,025%.

The steel X30WCrV 9-3 (1.2581) is the closest foreign analogue of this steel. It is produced in Europe according to DIN 17350 standard. The composition of the steel is given in the table:

Component C Si Mn Cr Ni V
Content in steel, % 0,25...0,35 0,15...0,30 0,20...0,40 2,50...2,80 8,0...9,0 0,30...0,40

Company Evek GmbH sells sheets and strips made of alloyed tool steel grades 3Х2В8Ф and X30WCrV 9-3 (1.2581) at a favorable price from the manufacturer. The supplier provides the necessary nomenclature of sizes of rolled sections, guarantees its timely delivery to the address specified by the consumer.

Properties and application

The steels under consideration belong to the group of steels of increased heat resistance. Therefore they are able to operate for a long time under cyclic heating up to 580 ...6000 C. This predetermines the use of steels 3Х2В8Ф and X30WCrV 9-3 (1.2581) for manufacturing of small-sized hammers, stamping inserts KGShP with the force up to 25 MN, and GKM inserts with the force up to 8 MN. Besides from steels 3Х2В8Ф and X30WCrV 9-3 (1.2581) make piercing needles, press-pins and ejectors, and also details of molds for molding under pressure of fusible nonferrous alloys. The durability of steels is increased if they are produced by electroslag remelting.

After quenching from temperatures of 1130...11500 С followed by tempering the steels have the following operational indicators:

  • Hardness - 49...52 HRC;
  • Heat resistance - 620 0 C;
  • Volumetric effect of martensitic transformation - 0.61%;

Buy sheet and strip, made of alloy tool steels grades 3X2V8F and X30WCrV 9-3 (1.2581), the manufacturer offers the company Evek GmbH. The supplier ensures strict adherence to the assortment and range of supply, timely delivery of rolled products to the address specified by the customer is guaranteed.