Sheet, strip 38х2muA - 34CrAlMo5 - 38hmj
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 38X2MYUA | 34CrAlMo5 | Delivery from the stock, in stock |
Evek GmbH offers to buy medium-carbon steel 38KhMYUA aluminum-oxidized rolled steel, which is available in strips and sheets. The price from the manufacturer is valid. The supplier guarantees compliance with the assortment range, as well as product delivery to the address specified by the consumer.
Chemical composition
High-quality structural alloyed steel 38KhMYUA, deoxidized during melting by aluminum, is produced in accordance with
| Component | C | Component Si | Mn | Cr | Mo | AL | Ni | Cu |
|---|---|---|---|---|---|---|---|---|
| Content in steel, % | 0,35...0,42 | 0,20...0,45 | 0,30...0,60 | 1,35...1,65 | 0,15...0,25 | 0,70...1,10 | 0.3 max | Not more than 0.3 |
As metallurgical impurities in 38CrMoVA steel are phosphorus and sulfur. Their percentage should not be more than 0.025%.
The closest European counterparts of this steel are steel 34CrAlMo5 and steel (produced in Poland). The chemical composition of 34CrAlMo5 steel according to EN 84-70 is as follows:
| Component | C | Si | Mn | Cr | Mo | AL |
|---|---|---|---|---|---|---|
| Content in steel, % | 0,30...0,37 | Up to 0.40 | 0,40...0,70 | 1,00...1,30 | 0,15...0,20 | 0,80...1,20 |
Traces of copper and nickel are allowed, and impurity limits are: phosphorus not more than 0.025%, sulfur - not more than 0.035%.
Evek GmbH offers to buy sheets and strips made of medium-carbon structural steel 38CrMuA, 34CrAlMo5 and 38hmj at favorable producer price. The supplier provides the necessary quality of delivery of sheet products and guarantees the timely delivery of products to the customer.
Properties and application
After high-temperature annealing, 38CrAlMo5, 38hmj steel grades should meet such values of their physical and mechanical parameters:
- Tensile strength - not lower than 235 MPa;
- The limit of plasticity - not lower than 123 MPa;
- Tensile strength - not less than 14 kJ/m2;
- Relative elongation - not less than 14%;
- Brinell hardness - not more than 132 NV.
Sheet and strip steel grades 38CrMoA, 34CrAlMo5 and 38hmj are used in the manufacture of parts such as sleeves, valve disks and body parts operating at temperatures ranging from 450 to5000 C. These steels are effectively subjected to nitriding, as a result of which their anticorrosion characteristics increase.
Evek GmbH offers to buy sheet and strip made of 38CrMuA, 34CrAlMo5 and 38hmj steels. The supplier guarantees the price of products from its manufacturer, and also provides delivery to any location specified by the consumer.