Sheet, strip 15x - 15Cr3 - aisi 5115
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 15X | 15Cr3 | Delivery from the stock, in stock | |||
| 15X | 5015 | 1.7015 | 15Cr3 | Delivery from the stock, in stock |
Evek GmbH offers to buy sheets and strips of structural steel with high chromium content. Price - from the manufacturer, delivery of ordered products provides the supplier
Buy rolled sheet of steel grades 15X, 15Cr3, AISI 5115 offers the company Evek GmbH. On the sheet and strip is the price of the manufacturer. Supplier provides strict compliance with the assortment of supply of rolled products. Products are delivered to any location specified by the customer.
Chemical composition
Chromium-alloyed structural steel of 15Х grade is produced in CIS countries in accordance with
| Component | C | Cr | Mn | Cr | S | P |
|---|---|---|---|---|---|---|
| Content in steel, % | 0,12...0,18 | 0,17...0,37 | 0,40...0,70 | 0,70...1,00 | Not more than 0.035 | Not above 0.035 |
The nearest foreign counterparts of steel are as follows: in Europe - steel 15Cr3, which is produced in accordance with DIN 17006 standards, in the USA and North America - steel AISI 5115, which is produced in accordance with ASTM A516. Chemical composition of these steels practically corresponds to the data given in the table.
Evek GmbH offers to buy sheet metal rolled products - sheets and strips of any size and thickness made of low-carbon chrome-alloyed steel 15Х, 15Cr3 and AISI 5115. Attractive price from the manufacturer. Supplier guarantees all terms of delivery of ordered products, as well as delivery of rolled products to the location specified by the customer.
Properties and application
After quenching and tempering, 15X, 15Cr3 and AISI 5115 steels have the following mechanical properties:
- Tensile strength - 700 MPa;
- yield strength - 500 MPa;
- Relative elongation - 12%;
- Relative narrowing of the cross section - 45%;
- Tensile strength - 700 kJ/m2;
- Brinell hardness - not less than 187 NV.
Steels are well amenable to various types of chemical-thermal treatment, as a result of which the surface receives increased hardness and wear resistance, while the core retains toughness and well resists bending stresses. 15X, 15Cr3 and AISI 5115 steels are characterized by good cold forming properties and can be used for cold forming of flat and three-dimensional plates. These products are well machinable on metal-cutting machines, and before the carburizing steel have good weldability.
Buy strip and sheet produced from chrome-containing steel grades 15X, 15Cr3, AISI 5115 offers the company Evek GmbH. The favorable price of the producer is valid. The supplier provides assortment minimum delivery, as well as timely transportation of products to any point specified by the customer.