Evek GmbH offers to buy sheets and strips of chromium-nickel low-carbon structural steel at the manufacturer's price. The supplier provides strict adherence to the nomenclature of supply, as well as timely delivery of products to the address specified by the customer.

Evek GmbH offers to buy rolled sheets of chromium-nickel steel grades 12ХН2, 15CrNi6, 15hn. The supplier provides a cost-effective price from the manufacturer, also provides product delivery to the address indicated by the customer.

Chemical composition

According to the national GOST 4543 specifications, low-carbon structural steel 12XH2 with high nickel and chromium content has the following chemical composition:

Component C Si Mn Cr Ni Cu

Presence in steel, % 0,09...0,16 0,17...0,37 0,40...0,70 0,60...0,90 1,50...1,90 Not more than 0,25...0,30

In the composition of this steel is inevitable metallurgical impurities - sulfur and phosphorus. Their percentage content may not be higher than 0.025% for each of the elements.

Among the most popular foreign counterparts of this steel are 15CrNi6 (which is melted according to German standard DIN 17210), and Polish steel 15hn. Their chemical composition is somewhat different from the above:

Component C Si Mn Cr Ni

Percentage steel content 0.14...0.19 Up to 0.40 0.40...0.60 1.40...1.70 1.40...1.70

Copper in the composition of steel 15CrNi6 and 15hn no, and metallurgical impurities (sulfur, phosphorus) are limited to the bar in 0.035 ... 0.04%.

Buy rolled sheet - strips, sheets of chromium-nickel low-carbon structural steel grades 12XH2, 15CrNi6, 15hn offers the company Evek GmbH. The supplier guarantees a favorable price from the manufacturer, and also provides timely delivery of products to the address specified by the customer.

Properties and application

After hot or cold rolling, the steels of the above grades have the following physical and mechanical properties:

- Tensile strength 800 MPa;

- Ultimate ductility 600 MPa;

- Tensile elongation 12%;

- Relative narrowing of the profile of 50%;

- Tensile strength 900 kJ/m2.

Low-carbon chromium-nickel steels 12XH2, 15CrNi6, 15hn after treatment are subjected to carburizing and are used for the production of parts, during the operation of which an optimal combination of strength and ductility is needed. Among

of such parts include gears, gears, plates that simultaneously work in bending and compression , etc. Steels have satisfactory machinability by pressure and machining, but their welding is done only under a layer of flux.

Evek GmbH offers to buy sheets and strips made of chrome-nickel low-carbon structural steels. The supplier guarantees the producer price of the products. Prompt delivery of the purchased batch to the address specified by the consumer is made.